Troubleshooting guide

Troubleshooting Reference
42
An LED in the
flashlight is
not lit.
Flashlight is reaching the
end of internal battery
power.
Plug the Duracell® Powerpack
into an AC or DC power source
and place the flashlight back in
the flashlight compartment for
recharging.
Flashlight run
time less than
expected.
Flashlight was recharged
from internal battery when
Duracell® Powerpack was
not connected to a power
source.
For longest run time, ensure the
Duracell® Powerpack is
connected to the AC charger
before recharging the flashlight.
Duracell®
Powerpack
makes a
“chattering
sound when
flashlight is
inserted into
compartment.
Metal contacts on the
flashlight or in the
flashlight compartment
are obstructed with dirt,
corrosion or debris.
Unplug the Duracell®
Powerpack from all AC or DC
power sources and clean the
contacts using an alcohol swab.
Table 5-1 Troubleshooting reference
Problem Possible Cause Solution
Duracell_PP_300_PlusEP.book Page 42 Wednesday, June 13, 2007 4:02 PM