Installation Guide

•
•
•
•
•
•
•
•
•
•
•
•
not have grounding.
will
ASSEMB
FIXTURE ASSEMBLY (Fig. 1)
Push spotlight fixture (A) into the ground). Turn knob
counter-clockwise and adjust light to desired angle. Turn
knob clockwise to lock into place. Push assembly into the
ground. Note: DO NOT use a hammer. For ground with hard
soil, soen soil by pouring water into the area, create a pilot
hole with gardening tool. Do not aempt to use your weight
to push the fixture into the ground.
LY AND INSTALLATION INSTRUCTIONS
Step 1
Select a transformer (sold separately) or Plug-N-Go lighng
set (set includes a transformer and lights).
Step 2
1-855-826-7488
Lo
outlet.
cate a power outlet to plug in transformer. lt is recommended
Plug-N-Go separately) onto
Step 1
Step 2
Connect female connector from transformer to male connector
of the closest light.
Step 3
a
is available If your layout requires to branch into 2
different direcons, a splier is available (sold separately). When
you come to the end of your string, place the cap that was removed
from the transformer female lead (see TRANSFORMER
INSTALLATION step 3) onto the female lead of the last fixture.
re connected. Note: Fi
Step 4
Cover wire with ground cover.
the fixture.
MULTIPLE FIXTURES INSTALLATION (Fig. 2)
Fig. 3
Model: SS912C-M400-ORBT-1
Plug-N-Go
“
“
‘
‘
‘
‘
s
a
1-855-826-7488
Step 3
Locate the female Plug-N-Go lead with connected 15' wire
coming from transformer. Remove the cap (save for later use)
Note:
wire is needed to reach the first fixture, a 10' extension
is available (sold separately).
Plug-N-Go Low Voltage
Spotlight
Fig. 2
male connector
female connecctor
( )
1.5m
( )
1.5m
male connector
female connector