Installation Guide

CARE AND MAINTENANCE
•
•
• DO NOT use a
off the power supply and removing the transformer.
ny cleaners with chemicals, solvents or harsh
abrasives.
TROUBLESHOOTING
If all lights are not working properly,
• Check if the power is on.
• Check if the transformer is connected properly and if the
photosensor is not receiving direct light from a porch or
streetlight. Note: There is a 10 second delay from when the
photosensor is covered and when the light should come on.
If some lights are not working properly,
•
WARRANTY
the d
Step 4
The second wire lead coming from the transformer is the
photosensor. This should be placed in a spot where it
will receive ambient outdoor light, but not direct light from
porch lights and streetlights, etc. The photosensor will allow
Step 5
Plug the transformer into the outlet and proceed to turn on
assembly. Note:
cover the photosensor with a piece of black electrical tape or
dark cloth.
ate of purchase. If within this period the p
two (2)
roduct is found
be returned with a copy of receipt as proof of purchase to
repair, replace or refund the purchase price to the original
purchaser. Warranty does not include damages due to misuse,
and you may also have other rights that vary from state to state.
1-855-826-7488
Fig. 3
male connector
female connector
female connector
( ) ( )
photosensor
4.5m
1.5m
( )
1.5m
transformer
(
)
12in.
30cm