polishedpro | 2.
Table of Contents Technical Data Sheet 3 General Information 4 Recommended Tool List 5 Installation Instructions 6 Maintenance Instructions 9 Product Warranty 10
polishedpro | 2.0mm LVT Technical Data Sheet General Specifications Overall Product Thickness: Wear Layer Thickness: Product Type: Product Dimensions: Finish: Residential Warranty: Carton Quantity - Plank: Carton Weight: 2.0 mm 8 mils (0.2 mm) Glue Down Luxury VInyl Tile (LVT) 6" x 48" Scratch-Resistant Polyurethane 25 Years 20 Pieces (36 sq. ft.) 25.89 lbs.
polishedpro | 2.
polishedpro | 2.0mm LVT Recommended Tool List • Knee Pads • Safety Glasses • Cut-Resistant Safety Gloves • Dust Mask • HEPA-Filtered Vacuum • Oscillating Multi-Tool or Hand Saw (for door jambs) • Chalk Line • Three-Section 100 lb. Floor Roller • Appropriate Notch Trowel • Tape Measure • Utility Knife with Blades • Pencil • Speed Square • 6-foot and 1-foot Straight Edge or Level DuraDecor | P: (855) 700 - 5666 | customercare@duradecor.com | duradecor.com | revised on 02.7.
polishedpro | 2.0mm LVT Installation Instructions 1. Substrate Preparation General Substrate Guidelines Ensure the substrate is clean, dry, flat, sound and suitably prepared according to these instructions prior to installation, as manufacturer is not responsible for problems related to substrates that have not been properly prepared.
polishedpro | 2.0mm LVT Installation Instructions vinyl or linoleum, as well as existing hard surface flooring substrates, such as terrazzo, porcelain or ceramic tile. Ensure existing flooring is a single layer and is clean, dry, sound, solid and well adhered. All loose material must be removed and repaired or replaced. All grout lines and wide seams greater than 1/4-in.
polishedpro | 2.0mm LVT Installation Instructions Adhesive Application Only apply as much adhesive as can be covered within the working-time, typically to only one side of the starting line at a time. Apply the adhesive slowly and evenly to the substrate at the appropriate angle using the specified trowel notch. Avoid skips, puddles or sharp trowel turns. Allow the specified open time for the adhesive, depending on the porosity of the substrate and the site conditions.
polishedpro | 2.0mm LVT Maintenance Instructions 1. Precautions Remove all metal objects before conducting maintenance and use caution tape and/or “Wet Floor” signs to prohibit foot traffic until the floor is dry. Do not use hydrocarbons, harsh disinfectants, cleaning agents, dyes, acetone or other harsh chemicals – ensure all chemicals and materials that may come in contact with flooring surface will not stain, mar or otherwise damage the surface.
polishedpro | 2.0mm LVT Product Warranty 1. General Terms DuraDecor (“Manufacturer”) warrants that, when used properly and under normal operating conditions, the flooring products described in the Manufacturer’s catalog as PolishedPro Glue Down LVT Flooring (“Product”), a 2.0mm thick Luxury Vinyl (LVT) floor covering that includes a 0.
polishedpro | 2.0mm LVT Product Warranty Instructions, Maintenance Documents and any other relevant technical documents. Residential Labor Coverage: ≤ 1-year: 100% ≤ 10-years: 40% ≤ 5-years: ≤ 20-years: > 20-years: • 60% 20% 0% 2.5. Waterproof Warranty: The Product will not be materially impaired when exposed to wet or damp cleaning, surface spills and/or tracked in water for the length of the Wear Warranty. This does not include water emergencies. 2.6.
polishedpro | 2.0mm LVT Product Warranty • • • • • fungi. Normal shade, color, gloss/sheen, or embossing texture variation, including variations between installed flooring and physical flooring samples or printed marketing materials. Excessive wear caused by improper maintenance, dirt, grit, and/or abrasive debris. Excessive moisture and alkalinity from the subfloor or substrate.