MODELS/ MODELES/ MODELOS: 10HM8000, 10HM2273, 10HM4128, 10HM1342, 10HM4126, 10HM2274, 10HM4124 INSERT MODEL/ INSERT MODELES/ INSERT MODELOS: 10QI071ARA Français P.10 Español P.18 www.tsicustomerservice.com Twin-Star International, Inc; Delray Beach, FL 33445 Made in China • Printed in China • Fabricado en China • Impreso en China • Fabriqué en China • Imprimé en Chine REV-0 1 www.tsicustomerservice.
GETTING STARTED 1. Remove the product indentification sticker from the front of the insert 10QI071ARA e / Modelo: 01 Model / Modèl10QI-0208-MB0000! SN #: for service ! number le service Keep this numéro pourpara servicio! Gardez ce número Mantega este Product Identification Sticker 2. Attach the Product Identification Sticker to the Manual below for future reference. This information is used for product registration and also is nessessary for customer service.
IMPORTANT INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following: 1. Read all instructions before using this appliance. 2. This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this appliance.
OPERATION INSTRUCTIONS Display Control Panel The heater can be operated by either the remote control or the control panel. Power Timer Temperature REV-0 4 www.tsicustomerservice.
OPERATION INSTRUCTIONS FUNCTION ICON POWER DESCRIPTION The POWER button supplies power to all the functions of the heater. Pressing the POWER button again the heater will be put in standby mode. Pressing and holding the POWER button on the control panel for 3 seconds will switch between °F and °C. TIMER There are 9 timer settings and OFF that can be selected. OFF(00), 30min, 1Hour, 2H, 3H, 4H, 5H, 6H, 7H, 8H.
TROUBLE SHOOTING Problem Heater does not blow warm air. Root Cause Corrective Action Dirty filters Clean or replace filters. Periodic cleaning/vacuuming of the filter is recommended. Not reaching set temperature. Perform a master reset; turn off and unplug unit. Hold down main power button on the unit itself. Continue to hold button down while plugging unit back in. Once unit is plugged back in continue to hold button for 5 seconds and then release.
EXPLODED VIEW Part 1 2 3 4 5 6 7 8 9 10 Part Name Control panel circuit board Infrared Element Main Circuit Board Power Cord Filter Filter Cover Blower Caster Remote Control Touch-up Pen Note, the scale and size of your parts may be different depending on your exact model 7 4 6 5 3 2 1 8 9 10 REV-0 7 www.tsicustomerservice.
FCC/IC INFORMATION NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3-YEAR LIMITED WARRANTY The manufacturer warrants that your new Electric Heater is free from manufacturing and material defects for a period of three years from date of puchase, subject to the following conditions and limitations. 1. Install and operate this Electric Heater in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty. 2.
