MODEL / MODELO 10ILH120-01, 10ILH120-02 Español P.11 www.tsicustomerservice.com 1-800-318-9373 Twin-Star International, Inc; Delray Beach, FL 33445 Made in China • Printed in China • Fabricado en China • Impreso en China A462 1 www.tsicustomerservice.
IMPORTANT INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following: 1. Read all instructions before using this appliance. 2. This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this appliance. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.
GETTING STARTED 1. The serial number is located on the side of the lantern, the serial number is necessary for product warranty registration and customer service. 18-9373 m (+1) 800-3 tomerservice.co www.tsicus 2345-A Fecha: SN #: AB-1 de Date/ Código Code Date Code/ Serial Number Model Number HEATER/ T/ MOVABLE MEUBLE CHAUFFAN OR DE MUEBLES CALENTAD 10ILH120-01 60Hz ~, 1500W, 120V l, Inc. Internationa Twin-Star arhome.com www.twinst 1278 TO UL STD. NO.46 CONFORMS TO CSA C22.
INSTALLATION INSTRUCTIONS 1. 2. 3. 4. Unscrw 5 screws holding the top cover as the image showing. Remove the cover from the lantern. Place black or white decorative rocks around the base of the candle. Re-attach cover in reverse order. Black Rocks White Rocks Fireglass A462 4 www.tsicustomerservice.
OPERATION INSTRUCTIONS Back view Control Panel The lantern can be operated by either the remote control or the control panel. A462 5 www.tsicustomerservice.
OPERATION INSTRUCTIONS FUNCTION POWER ICON DESCRIPTION The power button supplies power to all of the functions of the lantern. The power button will put the lantern in a standby mode. This will turn off all functions at once but will hold the settings in the memory. By pressing the Power button again the unit will turn on at the same settings. With the power on, press and hold the Power button on the control panel for 10 seconds or the heater indicator flashing to disable or re-enable the heater function.
TROUBLESHOOTING Problem Root Cause Corrective Action Location Your unit should always be positioned on an inside wall with proper insulation. The heater provides supplemental heating for up to 1000 sq/ft in conjunction with a primary heat source. The heater is taking a long time to reach desired Location room temperature. The back and side of the heater should be greater than 6 inches away from objects for proper air intake. Use of surge protector/ extension cord.
REPLACEMENT PARTS Part Part Name Part Number 1 Ring handle Y16-S206-RH 2 Candle Light PCBA Y16-S175-CLP 3 Flame Circuit Board Y16-S175-P40 4 Heater/Blower Assembly Y16-S206-P01 5 Control Panel Circuit Board Y16-S175-32 6 Main Circuit Board Y16-S175-P15 7 Remote control P137 CARE AND MAINTENANCE • Clean the trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth.
FCC/IC INFORMATION Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
1-YEAR LIMITED WARRANTY The manufacturer warrants that your new Lantern is free from manufacturing and material defects for a period of one year from date of puchase, subject to the following conditions and limitations. 1. Install and operate this Electric Appliance in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty. 2.