Instructions / Assembly

E-6
SAFETY PROTECTION SYSTEMS
This product has protection safeguards that shut off the product when parts become
excessively hot or if it tips over. If the product shuts off, immediately turn the control to
the "OFF" position and unplug it from the electric outlet.
If tipped over:
Place the product on a flat, level, stable surface in order to prevent the product from
tipping over again.
TIP: Always install and maintain at least one smoke detector in good operating condition
on each oor of your home. Periodically check and/or replace the battery in your smoke
detector with a new battery.
CARE AND MAINTENANCE
Before cleaning always remove the plug from the electrical socket.
Clean the air inlet /outlet grilles frequently.
Never use abrasive powders or solvents.
MAINTENANCE
WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING. DO
NOT IMMERSE HEATER IN WATER!
CLEANING: IMPORTANT! DO NOT IMMERSE HEATER IN WATER! Clean the heater
grilles with the vacuum brush attachment on your vacuum cleaner. This will remove lint
and dirt from the inside of the heater. DO NOT ATTEMPT TO TAKE HEATER APART.
Clean the body of heater with a soft cloth.
CAUTION: Do not use gasoline, benzine, thinner, harsh cleaners, etc., as they will
damage the heater.NEVER USE ALCOHOL OR SOLVENTS.
STORAGE: Store the heater with these instructions in the original carton in a cool, dry
place.