User Manual

2. Check all control surfaces are moving in the correct direction with the applicable
stick input (see below)
* Elevator ‘low rates’ 10mm ‘high rates’ 20mm in either direction from neutral.
* Aileron ‘low rates’ 10mm ‘high rates’ 18mm in either direction from neutral.
* Rudder ‘low rates’ 12mm ‘high rates’ 18mm in either direction from neutral
3. Das UglyStik handles very well in flight but requires setting up beforehand. Please
follow the recommended settings below for good all round flight performance
8
10-20mm
10-20mm
10-18mm
10-18mm
12-18mm
12-18mm
Rudder