User Manual

INTRODUCTION:
SPECIFICATIONS:
Wingspan: 950mm (37.4”)
Lenght: 585mm (23”)
Flying weight: 850g (29oz)
Controls: 5 channel: ‘Elevons’ (Alierons/Elevator), Throttle, Rudder, Landing gear)
ESC: Durafly 40amp (pre-installed)
Motor: Durafly 2836 2200kv Brushless outrunner (pre-installed)
Prop: 6x4
Battery reccommened: 1300-2200mah 11.1v 3S lipo (30C min)
Radio System: Min 6 channel Rx and Tx. Elevons/delta setting on Tx required.
The Durafly Me-163 is truly a ground breaking model. Not only does this Komet
feature a fully working scale 'dolly' style undercarriage and blistering performance, it
can also carry a model rocket engine! As a 'PnF' model, all electronics come
pre-installed and ready to hook up to your choice of 6ch receiver. Its molded EPO
construction has a highly detailed surface finish externally, and carbon reinforcement
internally and features a color matched hard plastic belly skid, good access to all
electronics via the battery/canopy hatch and has excellent cooling through out.
Designed for pilots with some experience, the Me-163 benefits from incredible flight
performance and stability. Full power climb outs, virtually unlimited vertical,
aero-batics, huge loops and very fast passes are easily had at full throttle. Yet slow
the Me-163 down and she's just as stable and has no hint of a stall. Using the
recommended 2200mah 30-65C 3S lipo and supplied 6x4 prop, you can expect flight
times well beyond 6 minutes and with excellent power. Combine this with the working
scale dolly system, an airframe designed to take a model rocket engine and an
extreme level of scale detail, and you've got the most authentic R/C Me-163 on the
market today.
1