Spitfire MK24 V2 manual

1. Attach the flap control horn on the servo
side of the main wing with the horn
towards the hinge line.
2. Open the split flap and secure the horn
from the upside of the flap.
Note: No backplate used in this step or
it will stop the flap from fully retract.
3. Connect the wing leads to the harness the
first. Two ailerons servo to the Y harness
labeled AILE (CH1), main landing gears
to the harness with GEAR (CH5), two
LED leads and the flaps to the four way
harness labeled FLAP(CH6). Secure the
connector using the tape.
Assemble the plane
Install Control horn Connect the Y harness to the main wing
1.1
2.1
2
3.1
3.2
3.3
Alierons
Gears
Flaps/LED
Flaps
P. 5