Manual

9
FPV Canopy:
High speed FPV flying opens up a whole new level of enjoyment with the EFXTRA, add
the recommended FPV equipement to the provided FPV canopy and you have yourself
a rock solid and 100mph plus FPV racer. Follow the below assembly stages and you’ll
be expeiencing high speed FPV in no time.
1. Cut each plywood component from the framing and remove all tabs. Assemble parts
as shown below, gluing together with CA (super) glue. Before you glue the magnet in
place ensure it is the correct orientation to the receiving magnet on the fuselage.
2. Install your FPV VTX and camera (HS1177 recommended) as shown. The VTX can
be secured with cable ties if desired (A). Position the FPV canopy over the camera and
secure in place using the 2x6mm screws as shown (B). Use of hot glue is recommend
for extra security and to reduce vibration in the camera.
A.
B.
2x6mm