Manual

4
6. Connect the supplied Y-lead to the aileron servos then mount the wing to the fuselage
(A). Using the two 3x20mm bolts, screw the wing firmly to the fuselage ensure no servo
wires or ESC wires caught between the wing and fuselage as it closes (B).
7. Install your receiver in the fuselage between the servo’s as shown and connect all
servo wires. This space is tailor made for the recommended ORX receiver though any
other 4-6ch receiver can of course be used.
5. With the aileron now connected and centered, peel the paper backing off the bottom
of the aileron covers and affix each cover squarely in place as shown.
3x20mm
8. Affix the clear plastic ‘fuselage scratch plate’ to the underside of the nose of the
fuselage by removing the paper backing from the double sided tape and pressing into
position a shown. This PVC scratch plate will help protect the foam in this high impact area.
A. B.