EXP DECOUPLING, DRAINAGE SEALING, INSULATION DURABASE CI++ DURABASE WP DURABASE WP++ DURABASE DD 80++ DURABASE DD 80 DURABASE SW PLATON STOP ACCESSORIES
DURABASE Decoupling, drainage, sealing and insulation in a single system. Decoupling, drainage, sealing and insulation – The DURABASE solutions are the result of many four complementary and overlapping areas. years of experience and the consistent, rigorous A wide range of offers is available on the market, further development of components in line with however, these products often simply improve technical progress. Perfectly matched to one another, or optimise one aspect.
PRODUCT APPLICATION CI++ The matting system for decoupling with a sealing effect for tiled surfaces in indoor and outdoor areas WP WP++ DD 80++ Compound sealing mat for walls and floors in indoor areas The matting system for composite sealing with a decoupling effect in indoor and outdoor areas Drainage mats for highly water-permeable flooring structures in outdoor areas DD 80 The matting system for the double drainage of ceramic tiled surfaces outdoor areas SW The matting system for footfall n
DURABASE CI++ With its triple-layer construction, the multifunctional DURABASE CI++ matting system offers so much more than simply decoupling. The crack-bridging properties of the mat and its optimised shear force protection enable new tiles to be laid on old and damaged tiled floors, provided that these are still load-bearing.
Application areas Triple-layer construction Cracks in the subfloor n W ebbed special polypropylene backing fleece = When renovating older floors, cracks can be present in the subfloor, making it impossible to install a safely watertight new tiled surface. Damp from the subfloor When laying onto anhydrite screed, residual moisture from the screed itself can collect under the tiles and cause damage to the adhesive layer.
DURABASE WP Compound sealing mat for walls and floors in indoor areas DURABASE WP A tiled floor is not inherently waterproof. In particular, where there are junctions around fittings and at wall connections, water can seep below the tiles and damage the underlying foundation. DURABASE WP is a sealing tape which acts as a water vapour barrier.
ACCESSORIES for DURABASE WP and DURABASE CI++ For the perfect sealing or corners, joints and connections, permanently waterproof accessory parts are available.
DURABASE WP++ DURABASE WP++ DURABASE WP++ is the powerful composite sealing and decoupling system for tiled and natural stone flooring in indoor and outdoor areas. Special features of DURABASE WP++ are its watertightness, its decoupling effect and vapour barrier, as well as its high tensile bonding strength and exceptional loading capacity during installation. This makes it ideal for use on balconies and terraces, as well as in wet rooms with elevated technical diffusion requirements.
Properties Tiled or natural stone floors are not naturally watertight. At joints, at the connection points of installed parts and at wall edges in particular, water can seep below the flooring surface and damage the underlying foundation. Outdoors, this situation is even worse due to the effects of weather and frost.
DURABASE DD 80 ++ DURABASE DD 80++ DURABASE DD 80++ is ideal for use in combination with tiled and natural stone flooring and concrete slabs to create large surface drainage areas. Installation onto a gravel bed / chippings, drainage screed or even directly onto the film is also possible. The special arrangement of the dimples, which have varying heights of 6 and 8 mm, guarantees a sufficiently large and permanent drainage area, even for high water volumes.
Application areas Accumulation of water As a result of faults in the sealing gradient, such as increases in the overlapping area or unevenness, water can accumulate below tiled surfaces. Frost and heat When ceramic flooring is laid in outdoor areas, such as balconies or terraces, tiled surfaces are exposed to high thermal loads, which can lead to long-term damage in the surface structure.
DURABASE DD 80 The matting system for the double drainage of ceramic tiled surfaces outdoor areas DURABASE DD 80 DURABASE DD 80 is ideal for use in combination with tiles and with natural stone and concrete slabs, creating the large surface drainage areas which are essential for balconies and terraces etc. DURABASE DD 80 delivers effective drainage and additional sealing between the structural waterproofing and the surface structure laid over it.
DURABASE SW DURABASE SW Footfall and thermal insulation matting system for dry indoor areas ants Signifidcu ce anreddruectinodn up to u o s ll all and foootffafootf mbient a Lowers DURABASE SW, the “silent flooring” is a matting underlay system measuring just 1.5 mm thick and consisting of 3 layers of polypropylene, with a further plastic-bonded quartz sand layer, which has excellent sound and heat insulation properties.
PLATON STOP PLATON STOP PLATON STOP is a matting system measuring around 2.5 mm thick and which is ideal for the floating installation of all parquet and laminate flooring surfaces. It was developed with a dual objective: to counter footfall and ambient noise and to significantly soften the impact of walking on parquet and laminate flooring. The special dimpled structure noticeably absorbs shocks, making it tangibly more comfortable to walk on the flooring.
IDEAL SOLUTIONS FROM A SINGLE SYSTEM. DURABASE matting systems are the basis for many different requirements. These systems are complemented by comprehensive solutions for flooring, bathrooms, terraces, balconies and driveways.
EXP DURAL is a comprehensive provider of floor-level shower systems, profiles and matting systems for walls and floors Stair nosing profiles Floor level shower systems LED profiles and accessories Doormat systems Profile systems for parquet, laminate, carpet and designer flooring Tile profiles Expansion joint profiles Z-FLEX Recommended by: Matting systems for decoupling, drainage, sealing and insulation DURAL GmbH Südring 11 D-56412 Ruppach-Goldhausen Tel.
