MSDS

MATERIAL SAFETY DATA SHEET

Per OSHA-recommended ANSI Z400.1-2004 standard format &

in accordance with European standard format

1. Product and Company Identifcation: Date of preparation: May, 2014

Marine Paint & Varnish Duralux® Alkyd Enamel M724 Biloxi Blue, M735 Aquamarine, M737 Cruiser Blue, M748 National Blue,

M774 Gulf Blue

Producer: Progress Brands, California Products Corporation, 150 Dascomb Road, Andover, MA 01810 USA

Warehouse (Louisville): Bluegrass Distribution Center, 10313 Bunsen Way, Louisville, KY 40299

All Inquiries to: Tel. 1-800-225-1141 Emergency Information: 24 Hour Contact CHEM-TEL: 800-225-3924

International 24 Emergency Phone: 813-248-0585

2. Hazards Identification:

EMERGENCY OVERVIEW: Product Description: This product is a liquid with a strong hydrocarbon odor. This product is

considered to be a combustible liquid per the OSHA hazard communication standard and should be kept away from heat, flame

and sources of ignition. If swallowed, this product may get sucked into the lungs (aspirated) and cause lung damage or even

death. Prolonged or repeated skin contact can cause drying of the skin, which may produce sever irritation or dermatitis.

Combustible Liquid:

Flash point: 103°F (Seta Flash).

Flammable Limits: LEL: 1.1%, UEL: 5.9%

It has a solvent petroleum odor. When burned, the product produces carbon monoxide and other asphyxiates during combustion.

Harmful if inhaled and may cause delayed lung injury. Aspiration hazard if swallowed – can enter lungs and cause damage. Keep

away from heat, sparks and flame. Avoid breathing vapor. Use ventilation to keep vapor below exposure limits. Avoid contact

with eyes, skin and clothing. Material splashed into the eyes will irritate tissues. Gently flush material from eyes with clean

water.

3. Composition/Information on Ingredients:

Pigmented organic solvent-borne paints comprised of pigments, fillers, additives, and organic solvent-borne

resinous binder.

Note: Some products may contain non-hazardous pigments such as phthalocyanine blue or green (CAS #’s

147-14-8 & 1328-53-6).

Hazardous ingredients:

Mineral Spirits (CAS #64742-47-8) <25%, OSHA PEL 500 ppm

Aromatic Spirits (CAS #64742-95-6) <3.0% OSHA PEL 100 ppm

Titanium dioxide (CAS #13463-67-7) <13.0% ACGIH TWA 10 mg/m

4. First Aid Measures:

INHALATION: Move person to fresh air. Restore breathing. Treat symptomatically. Consult a physician. SPLASH (EYES): Flush

eyes immediately with large amounts of water for at least 15 minutes. Take to a physician if irritation persists. INGESTION: If

swallowed, call a physician if irritation persists. Never give anything by mouth to an unconscious person. Treat symptomatically.

Page One of Four Pages

PAGE 1
MATERIAL SAFETY DATA SHEET Per OSHA-recommended ANSI Z400.1-2004 standard format & in accordance with European standard format 1.
PAGE 2
Page 2: MSDS for Marine Paint & Varnish Duralux® Alkyd Enamels 5. Fire-fighting methods: Extinguish Media: Foam, dry chemical, or carbon dioxide Special Fire Fighting Procedures: Use supplied-air breathing equipment for enclosed areas. Cool exposed containers with water spray. Minimize breathing vapor or fumes. Unusual Fire and Explosion Hazards: Do not mix or store with strong oxidants such as liquid chlorine or concentrated oxygen. “Empty” product containers retain product residue.
PAGE 3
Page 3: MSDS for Marine Paint & Varnish Duralux® Alkyd Enamels 10. Stability and Reactivity: Stability: Hazardous polymerization will not occur. Stable. Hazardous reactions: Avoid high temperatures, amines, acids, hydroxyl or other active hydrogen compounds. Hazardous Decompositions Products: Incomplete combustions may produce fumes, smoke, carbon monoxide and other asphyxiates. 11. Toxicological Information: Mineral Spirits; lhl – rat LC50:3400 ppm/4H 12.
PAGE 4
Page 4: MSDS for Marine Paint & Varnish Duralux® Alkyd Enamels 16. Other Information: Note: Per 29CFR 1910.1200 (g) (2) (1) (C) (2), only hazardous substances present in excess of 1.0% by weight (or 0.1% for carcinogens) must be listed on an MSDS.