MSDS
MATERIAL SAFETY DATA SHEET
Per OSHA-recommended ANSI Z400.1-2004 standard format &
in accordance with European standard format
1. Product and Company Identifcation: Date of preparation: February, 2014
Product Name: Duralux® Aluminum Boat Green M736
Producer: Progress Brands, California Products Corporation, 150 Dascomb Road, Andover, MA 01810 USA
Warehouse (Louisville): Bluegrass Distribution Center, 10313 Bunsen Way, Louisville, KY 40299
All Inquiries to: Tel. 1-800-225-1141 Emergency Information: 24 Hour Contact CHEM-TEL: 800-225-3924
International 24 Emergency Phone: 813-248-0585
2. Hazards Identification:
EMERGENCY OVERVIEW: Product Description: This product is a liquid with a strong hydrocarbon odor. This product is
considered to be a combustible liquid per the OSHA hazard communication standard and should be kept away from heat, flame
and sources of ignition. If swallowed, this product may get sucked into the lungs (aspirated) and cause lung damage or even
death. Prolonged or repeated skin contact can cause drying of the skin, which may produce sever irritation or dermatitis.
Combustible Liquid:
Flash point: 102°F (TCC).
Flammable Limits: LEL: 1.1%, UEL: 7.6%
It has a solvent odor. When burned, the product produces carbon monoxide and other asphyxiates during combustion. Harmful if
inhaled and may cause delayed lung injury. Aspiration hazard if swallowed – can enter lungs and cause damage. Keep away
from heat, sparks and flame. Avoid breathing vapor. Use ventilation to keep vapor below exposure limits. Avoid contact with
eyes, skin and clothing. Material splashed into the eyes will irritate tissues. Gently flush material from eyes with clean water.
3. Composition/Information on Ingredients:
Pigmented organic solvent-borne paints comprised of pigments, fillers, additives, and organic solvent-borne resinous binder.
Ingredients:
Iron oxide (CAS #1309-07-1) <8.0%, ACGIH TWA 5 mg/m
3
Methyl amyl ketone (CAS #110-43-0) <25.0% ACGIH TWA 50 ppm
Aromatic naphtha (CAS #64742-95-6) <22.0% OSHA PEL 100 ppm
Titanium dioxide (CAS #13463-67-7) <13.0% ACGIH TWA 10 mg/m
3
Vinyl chloride (CAS #25806-48-0) <7.0% ACGIH TWA 5 ppm
Acrylic resin (80-62-6/141-32-2) <15.0% ACGIH TWA 2 ppm
4. First Aid Measures:
INHALATION: Move person to fresh air. Restore breathing. Treat symptomatically. Consult a physician. SPLASH (EYES): Flush
eyes immediately with large amounts of water for at least 15 minutes. Take to a physician if irritation persists. INGESTION: If
swallowed, call a physician if irritation persists. Never give anything by mouth to an unconscious person. Treat symptomatically.
Page One of Four Pages