Use and Care Manual

9
B. Base channel.
Note
1. It is important that these instructions
are followed step by step.
2. All parts are clearly marked and care
should be taken to use correct one.
3. Don’t install under windy condition.
4. If iyou are building the shed against a
wall, build it 2.5 ft. away then slide it in.
OPTION -1 RIGHT SIDE DOOR.
Using a carpenter square, line up corners. Align
base bars, mark the concrete at the holes in the
base
and drill concrete with suitable concrete
bit to accept 1/4” x 1 1/2” (M6 x 40mm) anchor
bolts.
(Qty - 24Nos. not provided).
Assembly on concrete foundation
M6 Anchor Bolt
Base ‘U’ Channel
Concrete
Parts Needed:
CODE QTY
B1LS 1
B1RS 1
B21Q 1
B22Q 1
B3S 1
CODE QTY
B4LS 1
B4RS 1
B5S 1
S1 24
Fig.1
1
Front
Right
Left
Back
B5S
B4LS
B22Q
S1
92 1/4” (2343mm)
92 1/4” (2343mm)
45 5/8” (1158mm)
45 5/8” (1158mm)
B1LS
B1RS
B4RS
B21Q
B3S
DOOR OPENING
30
1
/
4
” (
767
mm)
S1
B3S
B22Q
Inside Shed
B5S
Fig.2
1
2
Note
Measure in all direction as shown in
figure to make the base channel
assembly in a perfect.
Outside
Inside