Use and Care Manual

7
5. Fix the column support (CS) to the column with
two (S1) screws.
6. Assemble the sliding channel (SLAP & SRAP)
together with sliding channel joint (SJP). Secure
with 8 screws (S7)
7. Insert the front column fitting at the top of front column
(COSP) and secure with (S1) screws from inside.
Continue the same at the other side.
Fig.1
Fig.2
COSP
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
cs
S1
SLAP
SJP
SRAP
SJP
S7
SRAP
SLAP
S1
FCFP
FCFP
S1
COSP
2
1