Use and Care Manual

9
11. Place the wall panel (WP2A) on the base bar
(BBFP). Line up the holes with base bar.
Secure with (S1) Screws.
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
WP2A
WP2A
BBFP
S1
BBFP
First fix the middle screws then
go to the edges.
Tip
S1
ECAP
BBFP
DCBFP
WP2A
13. Fix to door column bottom fitting (DCBFP) on
the base bar (BBFP) with (S1) screws.
WP2A
First fix the middle screws then
go to the edges.
Tip
S1
SRAP
WP3A
WP2A
VBCF
12. Insert the Ventilation Blocking Cover (VBCF) in
between the sliding channel (SRAP) and the wall panel
(WP2A). Lineup the holes with the sliding channel &
secure with (S1) screws.