Use and Care Manual

10
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
16. Assemble the center band (CB1P) with column
fitting (CFP). Secure with (S1) screw at one end.
Make 2 Sets.
Fig.1
Fig.2
CB1P
CFP
S1
CB1P
14. Place the right Door column (DCRP) on top of
the base bar (BBFP) and insert into the wall panel
(WP2A). Line up the holes with wall panel and secure
with (S1) screws.
S1
BBFP
DCRP
Fig.2
DCRP
Fig.3
WP2A
S1
SRAP
Fig.1
Note
Make sure the door column
bottom fitting to be inside
the door column.
3
1
2
SRAP
DCRP
WP2A
15. Fix the door column bottom to the fitting (DCBFP)
with (S1) screws.
WP2A
BBFP
DCRP
BBFP
S1