Use and Care Manual

11
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
17. Fix the column fitting (CFP) to the front column
(COSP) with (S1) screws from inside, fix the other
end to the Door Column (DCRP) through the wall
panel with (S1) screw from inside.
18. Secure the wall panel (WP2A) to the center
band (CB1P) with (S7) screws from outside.
Fig.1 Fig.2
DCRP
S1
CB1P
CB1P
S1
COSP
2
1
S7
WP2A
19. Place the wall panel (WP3A) on the base bar
(BS1AP) front left side. Line up the holes with base bar.
Secure with (S1) screws with washers from out side.
Fig.1
WP3A
S1
FRONT
First fix the middle screws then
go to the edges.
Tip
BS1AP