Use and Care Manual
12
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
Make sure the overlapping
position of panels is as
shown in fig. 2.
Note
20. Place the wall panel (WP1A) on the base bar
(BBFP). Line up the holes with base bar.
Secure with (S1) screws.
S1
WP1A
BBFP
Fig.1
First fix the middle screws then
go to the edges.
Tip
WP1A
BBFP
22. Fix to door column bottom fitting (DCBFP) on
the base bar (BBFP) with (S1) screws.
S1
BBFP
ECAP
WP1A
DCBFP
WP1A
21. Insert the Ventilation Blocking Cover (VBCF) in
between the sliding channel (SLAP) and the wall panel
(WP1A). Lineup the holes with the sliding channel &
secure with (S1) screws.
WP3A
WP1A
S1
SLAP
VBCF