Use and Care Manual

27. Place the Corner Column fitting (CCFP) on top

of the base bar at the back side on both corners.

Secure with (S1) screws.

Fig.1

Fig.2

IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.

CCFP

BACK

26. Secure the wall panel (WP1A)to the centre band

(CB1P) with (S7) screws from outside.

28. Insert the column (COLP) into the Corner Column

fitting (CCFP) and secure with (S1) screws.

Make sure the direction of

the Column opening and

arrow up as per blowup

Note

COLP

Fig.1

Fig.2

Fig.3

Fig.4

COLP

Fig.5

COLP

2&3