Use and Care Manual

17
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
37. Place the top angle side assembly on top of back
top angle (ABLAP) and top of sliding channel (SLAP).
Secure with (S1) screws from top.
ABLAP
ABRAP
36. Assemble the top angle side front and back (AS1AP
& AS2AP) together with (S7) screws.
Make 2 Sets.
AS1AP
AS2AP
AS1AP
AS2AP
S7
AS1AP
AS2AP
2
1
35. Place the assembled top angle back in between
the column and back wall panel top side. Then insert
the Ventilation Blocking Cover (VBCF) in between the
top angle and the wall panel. Line up the holes with
panel and secure with (S1) screws from outside.
ABRAP
S1
ABLAP
S1
Fig.1
Fig.2
VBCF
VBCF
1
2
AS2AP
S1
S1
Fig.1
Fig.2
AS1AP