Use and Care Manual

42. Fix one column fitting with columns to the base

bar (BS1AP) with (S1) screws from inside.

Fig.1

IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.

43. Place the Wall Panel (WP4A) on the base bar side

(BS1AP). Line up the holes with base bar and top angle.

Front

Back

CFP

BS1AP

Fig.1 Fig.2

Front

Back

1. Secure the Panel at bottom with (S1) screws

to the base bar from out side.

2. Secure the Panel at top with (S1) screw

through the top angle to the Column (COLP)

WP4A

S1 S1

First fix the middle screws (top

or bottom) then go to the edges.

Tip

41. Assemble the Column fitting (CFP) with all columns

(COLP) with (S1) screw.

Fig.1

Fig.2

Make sure the direction of

arrow (Fig. 1) and opening of

the Column (Fig. 2) as Shown

Note

COLP

CFP