Use and Care Manual

IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.

Front

Back

44. Fix two column fitting with column to the base bar

(BS2AP) with (S1) screws from inside.

CFP

BS2AP

45. Place the Wall Panel (WP4A) on the base bar side

(BS2AP). Line up the holes with base bar and top angle.

Fig.1 Fig.2

1. Secure the Panel at bottom with (S1) screws

to the base bar from out side.

2. Secure the Panel at top with (S1) screw

through the top angle to the Column (COLP)

S1 S1

First fix the middle screws (top

or bottom) then go to the edges.

Tip

WP4A

46. Fix the Center band fitting (CBFP) to the Column

with (S1) screw.

CBFP