Use and Care Manual

24
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
56. Place the Wall Panel (WP4A) on the base bar
side (BS1AP) Line up the holes with base bar and
top angle.
1. Secure the Panel at bottom with (S1)
screws to the base bar from out side.
2. Secure the Panel at top with (S1) Screw
through the top angle to the Column (COLP).
S1
WP4A
Fig.1
WP4A
S1
COLP
Fig.2
BS1AP
First fix the middle screws (top
or bottom) then go to the edges.
Tip
57. Fix the Center band fitting (CBFP) to the Column
with (S1) screws. See Fig.
S1
CFP
S1
CBFP
58. Fix the Center band fitting (CFP) to the Column
with (S1) screws. See Fig.
2
1