Use and Care Manual

27
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
65. Place the Wall Panel (WP4A) on the back base
bar. Line up the holes with base bar. Secure the Panel
at bottom with (S1) screws to the base bar from out
side.
S1
VBCF
S1
WP4A
First fix the middle screws then
go to the edges.
Tip
67. Fix the Column fitting with Column to the back
base bar with (S1) screws.
S1
CFP
COLP
66. Insert the Ventilation Blocking Cover (VBCF) in
between the top angle and the wall panel. Line up the
holes with the top angle & secure with (S1) screws.