Use and Care Manual

28
70. Fix two Column fittings (CBF) with Columns to the
back base bar with (S1) screws from inside.
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
S1
68. Place the Wall Panel (WP4A) on the base bar
back. Line up the holes with base bar and top
angle.Secure the Panel at bottom with (S1) screws
to the base bar from out side.
S1
WP4A
First fix the middle screws then
go to the edges.
Tip
WP4A
S1
VBCF
COLP
69. Insert the Ventilation Blocking Cover (VBCF) in
between the top angle and the wall panel. Line up the
holes with the top angle & secure with (S1) screws.