Use and Care Manual

32
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
C. Roof
Parts Needed:
(2) Support bracket front right / back left (SB1AP)
(2) Support bracket front left / back right (SB2AP)
(2) Support bracketlong - front right / back left (SB3AP)
(2) Support bracket long - front left / back right  (SB4AP)
(8) Facia bracket support (FBS)
(2) Facia support left (FSLAP)
(2) Facia support right (FSRAP)
(4) Roof support (RS1AP)
(4) Roof support (RS2AP)
(6) Roof structure (RS4AP)
(2) Roof panel  (RP1AP)
(1) Roof panel (RP2AP)
(2) Roof panel (RP3AP)
(2) Roof panel (RP4AP)
(1) Roof panel (RP2AG)
(1) Roof panel window (RPWG)
(1) Ridge cover  (RC1P)
(3) Ridge cover  (RC2P)
(2) Roof flashing  (RF1AP)
All parts are clearly marked
and care should be taken to
use the correct one.
Note
(2) Roof flashing (RF2AP)
(4) Roof flashing (RFSAP)
(2) Facia panel left (FLAP)
(2) Facia panel right (FRAP)
(4) Top corner (TC)
(2) Ridge end cap (FC)
(134) Plastic washer (PW)
(54) Roof plug with washer (PPG)
(54) Roof pin (PIN)
(6) Ventilation Blocking Cover Side-1 (VBCS1)
(2) Ventilation Blocking Cover Side-2 (VBCS2)
(174) Sheet metal screw (S1)
(66) Machine screw with nut (S3)
1. Assemble the support bracket (SB1AP & SB2AP)
with Facia bracket support. Use (S3) bolt & nut.
Make 2 Sets
SB2AP
SB1AP
S3
FBS
FBS
S3
2. Assemble the roof support (RS1AP) & (RS2AP)
together with (S3) bolt & nut.
Make 2 Sets
RS2AP
RS1AP
S3
RS1AP
RS2AP