Use and Care Manual

IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.

12. Place the Roof Structure (RS4AP) on the top of

Roof support and top angle side. Secure with (S1)

screws to the top angle and Roof support as shown in

Fig. 1,2,3 & 4.

Fig.1 Fig.2

Fig.3

Fig.4

RS4AP

14. Place the Facia panel (FRAP) on Facia support

at right side. Line up the holes with Facia support and

fix the Roof plug with washer use a hammer (rubber

mallet) to drive in roof pin.

FRAP

RS4AP

PPG

TIP

First insert all roof plugs with washers

(Left & Right) then drive in the roof pins.

13. Place the Hinges Support (HS) to the roof structure

(RS4AP) and secure with (S1) screws. See fig.

RS4AP