Use and Care Manual

IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.

34. Insert the Roof flashing (RF1AP & RF2AP) under

the ridge cover. See fig. 1

Line up the holes and fix the roof plug with washer from

ridge cover through roof flashing to roof panel drive in

the roof pins. See fig. 2 & 3.

Use (S3) bolt & nut with washers to fix the Roof flashing

& Roof panel.

See fig. 4

Fig.2

Fig.4

35. Fix the Roof flashing (RFSAP) at the edge of roof

panel with (S3) bolt & nut with washers at both side,

see the overlapping on the blow up.

Fig.3

Fig.1

RF1AP

RFSAP

RF2AP

RC2P

PPG

RF2AP

RF1AP

RF2AP

VBCS2

VBCS1

VBCS2

VBCS1

RP4AP

RP3AP RP2AG

RP1AP

RP4AP

RP3AP

RP2AP

33. Insert the Ventilation Blocking Cover Side (VBCS1)

& (VBCS2) in between the roof pannel and the top

angle side (ASBP). Line up the holes and secure (S1)

screws with washer.

ASBP

Fig.1

Fig.2

RP4AP

VBCS2

RP4AP

VBCS2

VBCS1