Use and Care Manual

48
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
Fig.1
5. Assemble the Door panel strip bottom (DSBAP) with
Door panel. Make sure the Door panel bottom edge to
be inserted into the (DSBAP). See fig. 1
Secure the strip (DSBAP) with Door stopper (DSP)
with (S7) screws. See fig. 2
Secure the Door panel with (DSTBP) use (S7)
screws with washer from outside. See fig. 3
Secure the (DMSAP) with (DSBAP) use (S7) screw.
See fig. 3.
Secure (DSBAP) with (DVSP) use (S7) screws.
See fig. 4
Fig.2
Fig.3 Fig.4
6. Assemble to bottom slider (BS) to the Door panel.
Bottom side at both edge with (S3) bolt and nut with
washers.
BS
DMSAP
DSP
DMSAP
DSBAP
1&2
DSBAP
DVSP
DSBAP
DSBAP
DSP
S7
DSBAP
S7
3
4
S7
DVSP