Use and Care Manual
50
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
9. Place the door panel vertical support (DVSP) to
the Door panel (DL1AP) from inside secure the panel
to the (DVSP). Use (S7) screws with washer from
out side.
DL1AP
DL1AP
DVSP
S7
10. Assemble to Door stopper vertical (DSP) to the
Door panel (DL2AP). Make sure the side edge of
the panel to be inserted into the Door stopper profile
(DSP). Secure the stopper with Door panel with (S7)
screws as shown in fig.
DL2AP
DSP
S7
DVSP
DL1AP
DL2AP
DL1AP
DL2AP
DSP