Concealed Duct Owners Manual

DURASTAR.COM
13
ECO
The ECO feature is designed to decrease energy use while you sleep. This feature can only be
activated by the wired thermostat. The ECO feature is not available in FAN or DRY mode.
Press the ECO button when you are ready to go to sleep. When in COOL mode, the unit will in-
crease the temperature by 2°F (1°C) after 1 hour, and will increase an additional 2°F (1°C) after an-
other hour. When in HEAT mode, the unit will decrease the temperature by 2°F (1°C) after 1 hour,
and will decrease an additional 2°F (1°C) after another hour.
The ECO feature will turn off after 8 hours and the system will return to normal functioning.
FOLLOW ME
This feature uses the temperature at the thermostat's location, instead of the indoor unit's
location, to optimize the temperature around you and ensure maximum comfort. Press the
FOLLOW ME button to turn on this feature and the thermostat will display the temperature at its
location. When using AUTO, COOL, and HEAT modes the air conditioner will continue running until
the temperature at the thermostat's location is satisfied. Press the FOLLOW ME button again to
turn off this feature.
AUTO-RESTART
The auto-restart feature is enabled when power is interrupted to the unit. After power is restored,
the unit will automatically return to its prior settings before power was lost. No buttons need to be
pressed to set this feature - it is automatic.
Set
Temperature
1hr
1hr
Keep
Running
ECO Operation
Saves energy during sleep
In HEAT mode, temperature adjusts
(-1°C/2°F) per hour for the first two hours
In COOL mode, temperature adjusts
(+1°C/2°F) per hour for the first two hours