Ceiling Cassette Installation Manual

DURASTAR.COM

For Model DRAC24F1A

1. Remove the inner panel.

• Push both of the release tabs towards the middle simultaneously to unlock the latch on the

panel.

Piping side

Drain side

Latch

Screwdriver

• Hold the panel at a 45angle, lift it up slightly, and detach it from the main panel body.

2. Remove the installation covers at each of the four corners by sliding them outwards.

3. Install the main panel body by aligning the panel with the unit, taking into account the position of

the refrigerant piping and drain sides. Hang the four latches of the main panel from the hooks on

the unit. Tighten the panel hook screws evenly at the four corners so that the seal between the

main panel and unit compacts to 3/16 - 1/4". The edge of the panel should be in contact with the

ceiling board. Adjust the panel so that the ceiling opening is completely covered.