Floor/Ceiling Mount Installation Manual

DURASTAR.COM12

INDOOR UNIT INSTALLATION

STEP 1: SELECT INSTALLATION LOCATION

Before installing the indoor unit, you must choose an appropriate location. The following

standards should be met for an appropriate location for the unit:

• Good air circulation

• Convenient drainage

• Noise from the unit will not disturb other people

• Firm and solid - the location will not vibrate

• Strong enough to support the weight of the unit

• A location at least three feet (one meter) from all other electrical devices (e.g., TV, radio,

computer)

DO NOT install unit in the following locations:

• Near any source of heat, steam, or combustible gas

• Near ﬂammable items such as curtains or clothing

• Near any obstacle that might block air circulation

• Near a doorway

• In a location subject to direct sunlight

Refer to the following diagrams to ensure proper distance from walls and ceiling:

NOTE

If there is no pre-existing refrigerant piping, when choosing a location, leave ample room

for a wall hole (see Step 3: Drill Wall Hole for Connective Piping) for the signal cable and

refrigerant piping that connect the indoor and outdoor units.

≥1 3/8” (35mm)

≥40” (1015mm) from front

≥1 3/8” (35mm)