Owners Manual

DURASTAR.COM14
SILENCE
Press the SILENCE / FP button to turn on and off the SILENCE feature. When the SILENCE feature
is activated, the compressor will slow and the indoor unit will turn the fan to low. This will reduce
the noise of the indoor unit to the lowest level. Due to the slow operation of the compressor, it
may result in insufficient cooling and heating capacity.
FP
Press and hold the SILENCE / FP button for 2 seconds to start the FP feature. This feature is only
available in HEAT mode.
The FP feature sets the indoor temperature to 46°F (8°C). The unit will maintain this temperature
and prevent indoor pipes and household items from freezing when the house is unoccupied for
long periods of time in the winter. Press and hold this button again to turn off the feature.
FOLLOW ME
This feature uses the temperature at the remote's location, instead of the indoor unit's location,
to optimize the temperature around you and ensure maximum comfort. Press the FOLLOW
ME button to turn on this feature and the remote will display the temperature at its location.
When using AUTO, COOL, and HEAT modes the air conditioner will continue running until the
temperature at the remote’s location is satisfied. Press the FOLLOW ME button again to turn off
this feature.
AUTO-RESTART
The auto-restart feature is enabled when power is interrupted to the unit. After power is restored,
the unit will automatically return to its prior settings before power was lost. No buttons need to be
pressed to set this feature - it is automatic.
REFRIGERANT LEAK DETECTION
The indoor unit will automatically display “EC” when it detects a refrigerant leak. If a leak is
detected, turn off your unit and contact your dealer or certified technician for service.