Owners Manual

DURASTAR.COM
13
SLEEP
The SLEEP feature is designed to decrease energy use while you sleep. This feature can only be
activated by the remote control. The SLEEP feature is not available in FAN or DRY mode.
Press the SLEEP button when you are ready to go to sleep. When in COOL mode, the unit will
increase the temperature by 2°F (1°C) after one hour, and will increase an additional 2°F (1°C)
after another hour. When in HEAT mode, the unit will decrease the temperature by 2°F (1°C) after
one hour, and will decrease an additional 2°F (1°C) after another hour.
The SLEEP feature will turn off after eight hours and the system will return to normal functioning.
Set
Temperature
1hr
1hr
Keep
Running
SLEEP Operation
Saves energy during sleep
In HEAT mode, temperature adjusts
(-1°C/2°F) per hour for the first two hours
In COOL mode, temperature adjusts
(+1°C/2°F) per hour for the first two hours
NOTE
You can only activate the SELF CLEAN function in COOL or DRY modes.
LED DISPLAY
Press the LED button to turn on and off the display of the indoor unit.
TURBO
Press the TURBO button to turn this feature on and off. The TURBO feature enables the unit to
reach the set temperature in the shortest time by automatically controlling the fan speed. This
feature is only available in COOL and HEAT modes.
SELF CLEAN
Airborne bacteria can grow in the moisture that condenses around heat exchanger in the unit.
With regular use, most of this moisture is evaporated from the unit. By pressing the CLEAN button,
your unit will clean itself automatically. After cleaning, the unit will turn off automatically. Pressing
the CLEAN button mid-cycle will cancel the operation and turn off the unit. You can use CLEAN as
often as you like.