HANDHELD COMPUTER DA05 WinCE Quick Start Guide
Copyright © 2007 All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, or computer language, in any form, or by any means, electronic, mechanical, magnetic, optical, chemical, or other, without the prior written permission of the manufacturer.
Microsoft, Windows CE, Pocket PC, and Windows Mobile are registered trademarks of Microsoft Corp. Intel, Bulverde are the registered trademarks of Intel Corp. All product and company names are trademarks or registered trademarks of their respective holders.
EMC and Safety Notice Federal Communications Commission Radio Frequency Interference Statement This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause interference to radio communications. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
---Consult the dealer or an experienced radio/TV technician for help. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
3. Use an outlet that is far away from the interfered appliance. 4. Re-orient your computer in respect to the interfered appliance to see if there is improvement. If all of these failed, please call your dealer for help. CE This equipment complies with the requirements set out in the Council Direction on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC).
EN61000-4-8 Power-Frequency Magnetic Field EN61000-4-11 +A1:2001 Voltage Dips and Voltage Interruptions LVD EN60950-1 :2001 ETSI EN301 489-01 V1.4.1 EMC Standards for Radio Equipment ETSI EN 301 489-17 1.2.1 EMC Standards for 2.4GHz Wideband Transmission Systems) ETSI EN 300 328-2 V1.2.
Please recycle the packing materials, and at the end of the unit's life, all other materials in accordance with the local regulations. Please refer “Materials and Recycling” for the contents of the materials.
CONTENTS GETTING STARTED .............................................................................................. 1 WHAT’S IN THE BOX ................................................................................................ 1 QUICK START........................................................................................................... 2 CONTROLS, INDICATORS, AND PORTS ...................................................................... 3 OPERATING ENVIRONMENT AND RUGGEDNESS...........
GET HELP ...............................................................................................................20 SYNCHRONIZING DATA WITH PC.............................................................................20 RESETTING THE DA05 ............................................................................................21 USING WIRELESS LAN (OPTION) ....................................................................24 USING BLUETOOTH (OPTION)..............................................
STOP THE BLUETOOTH MANAGER.......................................................................... 62 SPECIFICATIONS................................................................................................. 63 CPU....................................................................................................................... 63 MEMORY................................................................................................................ 63 DISPLAY......................................
GETTING STARTED What’s in the Box The following components come with your handheld computer. If anything is missing or damaged please notify the dealer immediately. 1. 2. 3. 4. 5. 6.
Quick Start • • Attach the AC adapter to AC outlet. The adapter LED indicates the power is ready. Insert the battery and then plug in the adapter to handheld computer. Orange charge LED will light up till the battery is full charged. Charging time will be about 4 hours. , It’s recommended the battery is full charged before setting up. • • • Press the power button momentarily to turn on this device. Follow up the instruction on screen to finish the basic setting.
Controls, Indicators, and Ports Front: 9 10 8 1 7 6 2 3 5 4 3
1. Wireless ON/OFF (Flight or button 3) Turn ON/OFF the wireless device (Option: WiFi, Bluetooth, GPS) Please turn it OFF at locations with wireless control (hospital, onboard airplane, etc.) 2. Button (User programmable) 3. Button (User programmable) 4. Navigator button [Left], [Right], [Up], [Down] 4 directions [Enter] at the center 5. Button (User programmable) 6. Button 4 (User programmable) 7. Power Button Suspend or Wake up the system. 8.
1 Rear: 2 3 4 5 1. 2. 3.
4. 5. 6. Left: Battery knob Battery Microphone 1 2 1. 2. 3. 4. 3 4 Wireless device antenna USB client port Data sync with the computer. USB Host port For Keyboard, USB Flash storage.
Right: 1 3 1. 2. 3.
Top: 1 1.
Bottom: 2 3 1 1 2 3 DC jack PCMCIA slot One PCMCIA type II slot CF (Compact Flash card) will be available by PCMCIA-to-CF adapter Cradle docking connector Connection to cradle 9
Operating Environment and Ruggedness A clean and moisture-free environment is preferred. If it is necessary to work in a hostile environment, please make sure all ports are well protected from dust, moisture, or water. Proper isolation from extreme hazardous exposure is recommended. The computer is designed with rugged features of vibration, shock, dust, and rain/water protection. However, it is still necessary to provide appropriate protection while exposing to harsh environments.
COMPONENTS AND FUNCTIONS AC adapter When using the AC adapter: • Use a properly grounded AC outlet. • Use one AC outlet exclusively for the computer. Having other appliances on the same line may cause interference. • Use a power strip with built-in surge protection. The AC adapter automatically detects the AC line voltage (110V or 220V) and adjusts accordingly. Battery The computer will automatically switch to battery power when the external power source (AC adapter) is disconnected.
• Shut down the computer when not to use for a longer time Battery Low When the battery is nearly exhausted, the computer prompts a window warning. Once the Battery Low warning occurs, please do either or all of the following: 1. Save and close the files you are currently working on 2. Plug in the AC adapter to recharge the battery 3. Swap a charged battery Charge Battery 1. Plug in AC adapter will charge the battery automatically. If the battery is already full, the system will stop charge automatically.
To swap the battery: 1. Turn power OFF 2. Turn the battery knob counterclockwise to loose the battery 3. Remove battery from compartment 4. Insert a new battery 5. Press the battery down and turn battery knob clockwise to lock it 6.
Fix the stylus with tether 14
Optional Devices Cradle (optional) Cradle is the device for docking, port extension, and battery charging. AC adapter may attach directly to cradle and charges the computer battery as well as spare battery. There is a battery slot on the back of cradle to mount spare battery.
Front: Right LAN/RJ45 16
Rear 1 2 5 3 4 6 1. 2. 3.
4. USB Host 5. DC IN 6. COM port 7. Optional COM port Mount the cradle: 1. Computer should be power off before docking. 2. Open the rubber cap on the docking connector 3. Align the computer with cradle docking connector 4. Firmly push the computer down to engage the docking connector 5. Turn rotary latch to fix the computer Remove from the cradle: 1. Turn loose the rotary latch to release computer 2.
PCMCIA Slot The computer accepts one type-II PCMCIA card. Insert the card firmly into the slot and fix the rubber cover for water/dust protection. To remove the card, push the eject button to pop out the card. The eject button can hide into the compartment by pushing it inward gently. It may be necessary to load PCMCIA card driver to enable the function. Note: If the computer is working with dust, moisture, or water, to be sure to fix the PCMCIA rubber cap tightly with screws.
BASIC OPERATION Get Help Tap Æ Help or get it from companion CD Get the operation information from the list. Synchronizing data with PC Using ActiveSync, you can synchronize information on this device with information on the PC. ActiveSync is already installed on this device but you need to install it on your PC if your PC does not have it yet. Download ActiveSync from this website. http://www.microsoft.com/windowsmobile/activesync/activesync42.mspx Follow the instructions to install ActiveSync.
Resetting the DA05 Soft Reset To do a soft reset will delete any data that has not been saved in the ROM. But your saved files and programs are not deleted. Try a soft reset if the device does not respond when you tap the display or press a button. To do a soft reset, use the stylus to press the reset button on the rear. Hard Reset Notice: To do a hard reset will delete all the data stored in DA05 flash memory and any programs installed on DA05.
Do a hard reset if z z z You want to restore the device to factory default settings. You forget the password and need to reset it. Your device is experiencing severe operational problems and you have attempted a soft reset. To do a hard reset 1. Press and Hold Key4 and use stylus to tape reset button (on the rear).System will enter Eboot mode. 2. Press Key5 to format Storage.
3.
Using Wireless LAN (option) Connect to Internet: Turn on the Wireless Signals. 1.1 Press “Wireless” button on the DA05 keypad and screen will pop up a “Wireless Manager” dialog. (Figure 1-2) 1.2 Tap “On” button to enable wireless function and screen will pop up a “WLAN11G1” dialog. (Figure 1-2 & Figure 1-3) 1.3 Select a property wireless AP as “Figure 1-3” is called “CreTE_WL300”. 1.4 Tap “Connect” button and it prompts you a “Wireless Network Properties” dialog. 1.
function available. (Figure 1-5) 1.7 If you enter “Network key” is correctly then you can see “CreTE_WL300” icon shown connected status. ( Figure 1-6) 1.8 Now you can use “Internet Explorer” to surfer World Wide Web that for you want.
1.1 1.4 1.2 1.5 26 1.3 1.
1-7 1.
Using Bluetooth (option) Turn on the Wireless Signals. 1.1 Press “Wireless” button on the DA05 keypad and screen will pop up a “Wireless Manager” dialog. 1.2 Tap “On” button to enable Bluetooth function 1.3 When the bluetooth manager is run, a new window appears and a bluetooth icon appears in the task bar.
Tool Bar List Window Status Bar 29
The toolbar 1 2 3 1 2 3 4 5 6 7 8 9 4 5 6 7 Stop the current action Refresh Parent Folder(FTP) Show favorite list Show distant devices Show the about box Configure the application Show local service Shut down 30 8 9
The status bar Working indicator Distant Deivce State State : What the bluetooth manager is doing Working indicator : For long task (Inquiry, Connection) Distant device : With which device the bluetooth manager is currently connected Inquiry devices When the application is started, you need to click on to start inquiry remote Bluetooth devices. The devices found are shown in the main window.
represented by an icon (showing what class of device they are: computer, laptop, pda, audio device) and the name of the device. all futures clicks will show devices without Once you have clicked one time on inquirying (to decrease search time). To inquiry again remote bluetooth devices you . (Note : All the coupled devices are shown must refresh the list by clicking on without inquiry) In the list, after an inquiry, some device class and name can be not found.
During an inquiry, you can stop it by clicking on the the icon. Device pairing The device pairing can be done in three ways : • We want to be paired with another distant device For that the distant device must be in the list window to be paired with the current device. Right click on the selected device and click on pair A new window appears to insert the pin code. The pairing can be canceled by clicking on the close button or started by clicking on the OK button (after typing a pin code).
• A distant device try to pair with the current device (with no Auto Pin Code) When a device try to pair with the current device, a new window appear to enter the pin code selected by the distant device. • A distant device try to pair with the current device (With auto Pin Code) In this case, the user is not invited to type a pin code. It is automatically typed for him.
Properties and configuration Local services General In the Bluetooth Manager v1.5, there are three local services proposed to distant devices: SPP (Serial Port): A distant device wants to establish a serial connection with the local device OPP (Object Push): To receive files and contact information card FTP (File Transfer): To access to local directories, files and upload files and create directories Note : the OPP and FTP profil cannot be separated : You cannot deactivate one without deactivate the second.
You can activate or deactivate a local service by double-clicking it or by right clicking it and selecting the Start or stop item from the contextual menu. The local service is not activated The local service is activated You can also configure the service by selecting the Properties Item when you right click him. SPP Profile Load the SPP Server : If the Auto Server COM Port is not checked (cf. 0.
Application properties) • The application shows a dialog box with all the available port COM • • Select the COM Port to be mapped with the SPP Server The Serial Port profile is activated If the Auto Server COM Port is checked, the serial Port profile is activated with the last used COM Port for the SPP Server profile. If it is not available, an error appears.
If the service is connected you can know the COM port assigned by selecting “Properties” in the contextual menu of the service.
You can change the directory of the FTP server (directory seen by distant device) in the service properties (Contextual menu) OPP Profile You can change the directory where the File sent by distant device will be put.
Local device properties and configuration Click on • • • , to see: the local device properties (MAC address, name and device type) application option (start minimized, Auto assigned COM port number for client SPP and server).
Security properties Distant devices must be paired to access local service Don’t show a window when a distant device wants to be paired.
General properties Name for distant device of the current device MAC address of the current device devices Class of device of the current device 42
Application properties Check this if you want the Bluetooth manager starts minimized Check this if you want to affect the first available COM port to a SPP client connection Check this if you don’t want a dialog appears when you start the SPP server(to select the COM port) 43
About Box Click on the icon if you want some general information about the bluetooth manager: • Version • License information 44
Distant device properties You can have general information on a distant device (like the General tab of the Local device properties) by selecting “properties” in the contextual menu of the distant device.
Distant services Services Inquiry To inquiry the services available on a distant device, you have to double click on this one. After that, the bluetooth manager inquiries (it indicates this in the status bar) for all the services (among SPP/FTP/OPP/DUN) of the distant device. You can stop the inquiry with the icon. You can also refresh the list of services by clicking on the icon.
File Transfer To use this service, double click on the icon or choose connect on the contextual menu (right click). Then, the bluetooth Manager tries to connect to the distant service. If the connection is successful, the root directory shared by the distant will be shown in the list view. You can browse the device by double clicking on the . remote folder and go to the parent directory with To get a file, double-click or choose “Get File” from the contextual menu.
The file is downloaded by default to the “\My Documents\Bluetooth\Ftp” directory. You can change this one with the FTP properties (contextual menu of the File Transfer service). You can upload a file to the distant device by right-clicking on a whitespace of the listview and select Add file.
You can also delete a file by selecting delete on his contextual menu. Object Push To use this service, double-click on the distant service or select “Push file” on the contextual menu. Then you can choose the file to transfer.
Serial Port To use this serial service, double-click on the icon or choose “Connect” from the contextual menu. If the Auto Client COM Port is not checked (cf. 0.
Application properties) • The application shows a dialog box with all the available COM If the Auto Client COM Port is checked (cf. 0.
Application properties) • The Application selects automatically the first avalaible COM port in the system.
When the service is on, all applications could use the virtual COM port. To know the COM port setting, select properties in the contextual menu. When connected, the Manager can still be used as usual.
Dial-Up Networking To use the Dial-up Networking service, double click on the icon or choose "Connect" in the contextual menu. The first avalaible COM port in the system is assigned to the DUN profil on the selected device. The status of the service (connected or not) is displayed as shown below: Service connected Service not connected When connected, the Manager can still be used as usual. A modem associated to the COM port used by the service is created and can be used to establish a Dial-Up connection.
The modem created by the Manager is displayed in the list of available modems for Dial-Up connection when making a new connection ("Make New Connection" icon in the "Network and Dial-Up Connection" system window).
Distant disconnection management When a connection, previously established, is shut down by the distant host (manual disconnection or connection loss due to distant device shutting down or due to a weak signal), the user is notified of the disconnection and the Manager attempts to reconnect during a time t (by default, 1min30). The notification is made by a pop-up window and by changing the icon associated to the disconnected service.
Connection shortcuts management Shortcuts associated to defined services on defined devices make establishing connections with distant devices easier.
"Create Shortcut" item in the contextual menu of a connected service. If the shortcut already exists, a notification is displayed. If the shortcut is successfully created, a notification is also displayed. The button in the tool bar displays the connection shortcuts list. The service, the device and, eventually, the COM port are used in the shortcut name.
To establish a connection from the shortcut, double-click on the icon or select "Connect" in the contextual menu. Once the connection is established (even if the connection is not successfully established), the display is switched to the services list associated to device linked to the shortcut. The connection status of the service (connected or not) is displayed not only on the service icon but also on the associated shortcut icon.
Shortcuts can be deleted by using the "Delete" item of the contextual menu. The user must confirm the deletion.
The content of the shortcut list is saved between executions of the Manager.
Stop the Bluetooth Manager When the BlueTooth Manager window is closed (by the close button X), the application is still running in the background. To display or stop it, click on the BlueTooth icon on the Windows bar and select: “Show” or “Exit” .
SPECIFICATIONS CPU Intel Bulverde PXA270 CPU speed 624MHz Memory RAM ROM 128MB 128MB Display Type: Resolution: Color: Backlight: 4” Active TFT Transflective Color LCD 480 x 640 pixels 64K LED Touch Screen Type: Resistive 63
Interface: Serial I/O ports USB 2.0 port USB client port Serial port Audio ports (Microphone/Earphone) PCMCIA slot (type II x 1) SD slot System Unit Dimensions and Weight Width: Depth: Height: Weight: 90mm (W 3.5”) 150mm (H 5.9”) 33mm (D 1.3”) 450g (15 oz.
Frequency: Output Voltage: Maximum Power: Dimension: Weight: 50/60 Hz DC 12V 3.75A 45 Watts 108mm (4.2” W) x 56mm (2.2” D) x 34mm (1.3” H) 270 g (9.5 oz.) Battery Type: Capacity: Dimension: Weight: Lithium Ion 3.7V 3900mAH 71mm (W 2.8”) x 64mm (D 2.5”) x 12.3mm (H 0.5”) 108 g (3.8 oz.
Materials and Recycling Materials of the computer are as follows: Cabinet: Aluminum alloy ADC-12 or A380, Magnesium alloy AZ91D, UL grade PC+ABS GE C6200 or TN-3813BW Bracket: Aluminum 5052 Steel with Nickel plating Stainless Steel S304 Cushion pad: Nature rubber PCB: FR-4, UL 94V0 Battery: Rechargeable Lithium Ion Packing: Carton: Unbleached paper User's Guide: Recycled/Recyclable paper Please recycle the parts according to local regulations.
Environmental Ratings Temperature: Humidity: Altitude: DA05I: 0ºC ~ 45ºC (32ºF ~ 113ºF) operating -20ºC ~ 60ºC (-4ºF ~ 140ºF) storage DA05M: -20ºC ~ 50ºC (-4ºF ~ 140ºF) operating -40ºC ~ 70ºC (-40ºF ~ 158ºF) storage 5 ~ 95% Non-condensing operating 95% maximum storage 0 ~ 12,180 meters (0 ~ 40,000 feet) operating and storage 67
MAINTENANCE / SERVICE Cleaning Always turn OFF the power, unplug the power cord and remove the battery before cleaning. The exterior of the system and display may be wiped with a clean, soft, and lint-free cloth. If there is difficulty removing dirt, apply non-ammonia, non-alcohol based glass cleaner to the cloth and wipe. An air gun is recommended for cleaning water and dust. For salty water please wipe with fresh water then blow-dry with an air gun. Close all caps tightly before water cleaning.
• Remove the software suspected. RMA Service If troubleshooting is unsuccessful, please consult your dealer for service If it is necessary to send in the computer for repairs, please follow the dealer’s instructions for RMA# procedure. Shipping instructions: 1. Use the original shipping container and packing materials, if possible. 2. If the original packing materials are not available, wrap the equipment with soft material (e.g.
• • 4. 5. A DETAILED description of the problems you have encountered A list of the hardware/software configuration, if applicable. Clearly mark the outside of the shipping box with the RMA number. This will facilitate faster processing and avoid faulty return. Unless prior arrangements have been made, the customer is responsible for all shipping costs. Unauthorized use of the company’s shipping accounts is not permitted.
