HANDHELD COMPUTER DA05 Pocket PC Quick Start Guide
Copyright © 2007 All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, or computer language, in any form, or by any means, electronic, mechanical, magnetic, optical, chemical, or other, without the prior written permission of the manufacturer.
Microsoft, Windows CE, Pocket PC, and Windows Mobile are registered trademarks of Microsoft Corp. Intel, Bulverde are the registered trademarks of Intel Corp. All product and company names are trademarks or registered trademarks of their respective holders.
EMC and Safety Notice Federal Communications Commission Radio Frequency Interference Statement This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause interference to radio communications. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
---Consult the dealer or an experienced radio/TV technician for help. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
3. Use an outlet that is far away from the interfered appliance. 4. Re-orient your computer in respect to the interfered appliance to see if there is improvement. If all of these failed, please call your dealer for help. CE This equipment complies with the requirements set out in the Council Direction on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC).
EN61000-4-8 Power-Frequency Magnetic Field EN61000-4-11 +A1:2001 Voltage Dips and Voltage Interruptions LVD EN60950-1 :2001 ETSI EN301 489-01 V1.4.1 EMC Standards for Radio Equipment ETSI EN 301 489-17 1.2.1 EMC Standards for 2.4GHz Wideband Transmission Systems) ETSI EN 300 328-2 V1.2.
Please recycle the packing materials, and at the end of the unit's life, all other materials in accordance with the local regulations. Please refer “Materials and Recycling” for the contents of the materials.
CONTENTS GETTING STARTED .............................................................................................. 1 UNPACKING ............................................................................................................. 1 QUICK CHECK .......................................................................................................... 2 CONTROLS, INDICATORS, AND PORTS ...................................................................... 3 OPERATING ENVIRONMENT AND RUGGEDNESS......
GET HELP ...............................................................................................................22 CALIBRATE TOUCH SCREEN ...................................................................................22 ADJUST VOLUME ....................................................................................................22 SET YOUR OWN BUTTON FUNCTIONS .....................................................................22 TODAY SCREEN ................................................
USING BLUETOOTH (OPTION) ........................................................................ 41 SPECIFICATIONS................................................................................................. 64 CPU....................................................................................................................... 64 MEMORY................................................................................................................ 64 DISPLAY.........................................
GETTING STARTED Unpacking The following components come with your handheld computer. If anything is missing or damaged please notify the dealer immediately. 1. 2. 3. 4. 5. 6. 7.
Quick Check • • Attach the AC adapter to AC outlet. The adapter LED indicates the power is ready. Insert the battery and then plug in the adapter to handheld computer. Orange charge LED will light up till the battery is full charged. Charging time will be about 4 hours. , It’s recommended the battery is full charged before setting up. • • • Press the power button momentarily to turn on this device. Follow up the instruction on screen to finish the basic setting.
Controls, Indicators, and Ports Front: 11 12 9 10 8 1 7 6 2 3 5 4 3
1. Wireless ON/OFF (Flight or button 3) Turn ON/OFF the wireless device (Option: WiFi, Bluetooth, Phone, GPS) Please turn it OFF at locations with wireless control (hospital, onboard airplane, etc.) 2. Button (User programmable)(Dial button in Phone edition) 3. Button (User programmable) 4. Navigator button [Left], [Right], [Up], [Down] 4 directions [Enter] at the center 5. Button (User programmable) 6. Button 4 (User programmable) (Hang up button in Phone edition) 7.
1 Rear: 8 2 7 3 4 5 6 1. 2.
3. 4. 5. 6. 7. 8.
1 Left: 2 1. 2. 3. 4. 3 4 Wireless device antenna USB client port Data sync with the computer.
Right: 1 3 1. 2. 3.
Top: 1 1.
Bottom: 2 3 1 1 2 3 DC jack PCMCIA slot One PCMCIA type II slot CF (Compact Flash card) will be available by PCMCIA-to-CF adapter Cradle docking connector Connection to cradle 10
Operating Environment and Ruggedness A clean and moisture-free environment is preferred. If it is necessary to work in a hostile environment, please make sure all ports are well protected from dust, moisture, or water. Proper isolation from extreme hazardous exposure is recommended. The computer is designed with rugged features of vibration, shock, dust, and rain/water protection. However, it is still necessary to provide appropriate protection while exposing to harsh environments.
COMPONENTS AND FUNCTIONS AC adapter When using the AC adapter: • Use a properly grounded AC outlet. • Use one AC outlet exclusively for the computer. Having other appliances on the same line may cause interference. • Use a power strip with built-in surge protection. The AC adapter automatically detects the AC line voltage (110V or 220V) and adjusts accordingly. Battery The computer will automatically switch to battery power when the external power source (AC adapter) is disconnected.
• Shut down the computer when not to use for a longer time Battery Low When the battery is nearly exhausted, the computer prompts a window warning. Once the Battery Low warning occurs, please do either or all of the following: 1. Save and close the files you are currently working on 2. Plug in the AC adapter to recharge the battery 3. Swap a charged battery Charge Battery 1. Plug in AC adapter will charge the battery automatically. If the battery is already full, the system will stop charge automatically.
Swap Battery To swap the battery: 1. 2. 3. 4. 5. 6.
Fix the stylus with tether 15
Optional Devices Cradle (optional) Cradle is the device for docking, port extension, and battery charging. AC adapter may attach directly to cradle and charges the computer battery as well as spare battery. There is a battery slot on the back of cradle to mount spare battery.
Front: Right LAN/RJ45 17
Rear 1 2 5 3 4 6 7 18
1. Battery Lock 2. Spare battery charger 3. USB Client (No charging function) 4. USB Host 5. DC IN 6. COM port 7. Optional COM port Mount the cradle: 1. Computer should be power off before docking. 2. Open the rubber cap on the docking connector 3. Align the computer with cradle docking connector 4. Firmly push the computer down to engage the docking connector 5. Turn rotary latch to fix the computer Remove from the cradle: 1. Turn loose the rotary latch to release computer 2.
Mount spare battery: (spare battery is optional) Perform the same procedure as mounting primary battery on computer. Cradle will charge computer and spare battery simultaneously. PCMCIA Slot The computer accepts one type-II PCMCIA card. Insert the card firmly into the slot and fix the rubber cover for water/dust protection. To remove the card, push the eject button to pop out the card. The eject button can hide into the compartment by pushing it inward gently.
SD rubber cap tightly with screws.
BASIC OPERATION Get Help Tap Start Æ Help Get the needed information from the list or the bundled CD. Calibrate Touch Screen Tap Start Æ Settings Æ System Æ Screen Æ Align Screen to calibrate. Adjust Volume Tap speaker icon on the top bar and adjust the volume level as desired.
Today Screen The today screen displays information of today’s appointments and status icons, etc. Tap the information listed on today screen to execute the associated program. Tap Start Æ Today to enter Today screen. Find a File Tap Start Æ Find In Find, enter the file name, word, or other information you want to search for, If you have looked for this item before, tap the Find arrow and select the item from the list. In Type, select a data type to help narrow your search.
Manage Certificates Tap Start Æ Settings Æ System Æ Certificates Input your certificates. To delete a certificate, tap and hold it in the list, and then tap Delete. Input Tap Start Æ Settings Æ Personal Æ Input Select the input method and option you want. Menus Tap Start Æ Settings Æ Personal Æ Menus and select the items you want to appear on Start Menu. Owner Information Tap Start Æ Settings Æ Personal Æ Owner Information and follow the descriptions.
Password Tap Start Æ Settings Æ Personal Æ Password and follow the descriptions. Sounds & Notifications Tap Start Æ Settings Æ Personal Æ Sound & Notification and set your favorite notifications. Clock Tap Start Æ Settings Æ System Æ Clock. Memory Tap Start Æ Settings Æ System Æ Memory and follow the descriptions. The main tab displays the amount of memory the system has allocated to file and data storage versus the available memory.
Power Tap Start Æ Settings Æ System Æ Power The Battery tab displays the amount of battery power remaining.
Resetting the DA05 Soft Reset To do a soft reset will delete any data that has not been saved in the ROM. But your saved files and programs are not deleted. Try a soft reset if the device does not respond when you tap the display or press a button. To do a soft reset, use the stylus to press the reset button on the rear. Hard Reset Notice: To do a hard reset will delete all the data stored in DA05 flash memory and any programs installed on DA05.
Do a hard reset if z z z You want to restore the device to factory default settings. You forget the password and need to reset it. Your device is experiencing severe operational problems and you have attempted a soft reset.
To do a hard reset 1. Press and Hold Key4 and use stylus to tape reset button (on the rear).System will enter Eboot mode. 2. Press Key5 to format Storage. 3.
Using Wireless LAN (option) 1. Connect to Internet: Turn on the Wireless Signals. 1.1 Tap “Start”->”Settings”-> “Connection” tab. (Or directly press button to enter Figure 1-2) 1.2 Tap “Wireless Manager” and select “” item then select checkbox to “ON”. (Figure 1-1 & 1-2). 1.3 Wireless function has been enabled.
1-1 1-2 1-3 1.4 To input network authentication keys. (Figure 1-4) 1.5 If network keys are ok then you can see the Wireless works correctly. (Figure 1-5) 1.
1-4 1-5 2. Connect to Intranet Network: 2.1 Please refer to step 1.1 ~ step 1.3 2.2 Select “Work” option need to set the proxy later. (Figure 2-1). 2.3 if the connection needs network key, the screen will promptly pop up a Network key input Just type a correct network keys.
2.4 Tap “Start”->”Settings”-> “Connection” tab and tap “Connections”. (Figure 22) 2.5 Select “Set up my proxy server” to setup proxy and other relative settings etc. (Figure 2-3 & 2-4) 2.6 Tap “Start”->”File Explorer” , select “Menu”->”Open Path”->”New Path” , it will pop up a dialog to prompt you enter your intranet path. (Figure 2-5) 2.7 If you enter user name and password are correctly that you should be able to see intranet paths and files appear.
2-1 2-2 34 2-3
2-4 2-5 Using GSM/GPRS (option) 35
3. GSM 3.1 Firstly, to unplug the battery from DA05 rear and put SIM card into SIM slot. 3.2 Make sure the SIM card is connected correctly then put the battery back to DA05. (Figure 3-1) 3.3 Tap “Start”->”Settings”-> “Connection” tab 3.4 Tap “Wireless Manager” and select “” item then select checkbox to “ON”. (Figure 3-2 &3-3) 3.5 Press “GSM” button on the DA05 keypad and screen will pop up a dial-up dialog. (Note: If you have a SIM code that you must input the code to enable phone function.
3-1 3-2 37 3-3
3-4 4 3-5 GPRS 4.1 Please refer to step 3.1 ~ step 3.4.
4.2 Tap “Start”->”Settings”->”Connections” and select “Add a new modem connection” under “My ISP” item. (Figure 4-3) 4.3 select modem type to "Cellular Line(GPRS)", tap Next, then enter the Access Point Name(APN) ( Note: It is most important to enter this name, and the APN is different for each ISP provider). Tap Next, enter user Name and Password, then GPRS settings will be done. (Figure 4-4 & 45) 4.
4-1 4-2 40 4-3
4-4 4-5 Using Bluetooth (option) 41 4-6
1. Beam File function: Turn on bluetooth signals. 1.1 1.2 1.3 1.4 Tap “Start”->”Settings”->”Connections”. (Figure 1-1) Tap Beam and make sure that the “Receive all incoming beams” option is checked. (Figure 1-2) Tap “Start”->”Program”->”File Explorer”, tap and hold the file name to be copied and then tap “Beam File” on the pop-up menu. (Figure 1-3) Then you will see discoverable devices like following screen and tap then send this file to target device.
1-1 1-2 43 1-3
1-4 2 OBEX Profile : 2.1 Tap “Start”->”Settings”->”Connections”.
2.2 Tap BlueTooth and make sure that both “Turn on Bluetooth” and “Make this device visible to other devices” options are checked. ( Figure 2-2) 2.3 Execute IVT Soleil Bluetooth program from PC. (Figure 2-3) 2.4 Click Pocket_PC icon and click right mouse button then choice pairing option. 2.5 To input pairing password with connected device.(Note: pairing password must same as remote device)( Figure 2-3) 2.6 Meanwhile, device side will appear pairing password dialog as figure B2.
2-1 2-2 46
2-3 47
2-4 2-6 48
2-5 49
3 FTP Profile : 3.1 Please refer to step 2.1 ~ step 2.6. 3.2 Tap highlight icon “FTP Service” from PC’s IVT Soleil program then transfor Naming card to device. (Figure 3-1) 3.3 Finally, drag target file from File Explorer and drop to “Remote share folder” then file transfer will be done. (Figure 3-2).
3-1 51
3-2 52
4 ActiveSync Profile : 4.1 Tap “Start”->”Settings”->”Connections”. (Figure 2-1) 4.2 Tap “BlueTooth” –> “Device”->”Add new device” to search PC bluetooth host devices. (Figure 4-1) 4.3 Tap “COM Ports” ->“New Outgoing Port” and tap target device like “tttfbggsz39grh” , tap “Next” and choice virtual com port. Here it assumed is “COM7” for we need. (Figure 4-2) 4.4 Tap Start->Programs->ActiveSync and choice “Connect via Bluetooth” option. (Figure 4-3) 4.
4-1 4-2 54 4-3
4-4 5 A2DP Profile : 5.1 Tap “Start”->”Settings”->”Connections”.
5.2 Tap “BlueTooth” –> “Device”->”Add new device” to search Bluetooth A2DP device. (Figure 5-1) 5.3 To input the pairing password is “0000” and task bar will appear headset icon. 5.4 Now you could play music or video file and heard sound from connected device.
6 Hand-Free Profile : 6.1 Tap “Start”->”Settings”->”Connections”.
6.2 Tap “BlueTooth” –> “Device”->”Add new device” to search Hand-Free device. (Figure 5-1) 6.3 To input the pairing password is “0000” and task bar will appear headset icon. 6.4 Now you could press Hand-Free button from remote device and see phone’s dial-up dialog appear for your operate.
6-1 6-2 59
7 SPP Profile : 7.1 Tap “Start”->”Settings”->”Connections”. (Figure 2-1) 7.2 Tap “BlueTooth” –> “Device”->”Add new device” to search SPP device. (Figure 7-1) 7.3 Tap “New Outgoing Port” to 7.4 To input the pairing password is “0000”. 7.5 Select a “Virtual Com Port” like “COM6” for your implemented. 7.5 Now you could use Bluetooth GPS device to receive GPS data.
7-1 7-2 61
8 HID Profile : 8.1 Tap “Start”->”Settings”->”Connections” (Figure 2-1) 8.2 Tap “BlueTooth” –> “Device” tab and tap “Add new device” to search Bluetooth HID Mouse device. (Figure 8-1) 8.3 To input the pairing password is “0000”. 8.4 Now you could use Bluetooth HID Mouse to move mouse position and click focus something. PS: Bluetooth HID Keyboard is same as Bluetooth HID Mouse settings and will be used for user input.
8-1 63
SPECIFICATIONS CPU Intel Bulverde PXA270 CPU speed 624MHz Memory RAM ROM 128MB 128MB Display Type: Resolution: Color: Backlight: 4” Active TFT Transflective Color LCD 480 x 640 pixels 64K LED Touch Screen Type: Resistive 64
Interface: Serial I/O ports USB 2.0 port USB client port Serial port Audio ports (Microphone/Earphone) PCMCIA slot (type II x 1) SD slot System Unit Dimensions and Weight Width: Depth: Height: Weight: 90mm (W 3.5”) 150mm (H 5.9”) 33mm (D 1.3”) 450g (15 oz.
Frequency: Output Voltage: Maximum Power: Dimension: Weight: 50/60 Hz DC 12V 3.75A 45 Watts 108mm (4.2” W) x 56mm (2.2” D) x 34mm (1.3” H) 270 g (9.5 oz.) Battery Type: Capacity: Dimension: Weight: Lithium Ion 3.7V 3900mAH 71mm (W 2.8”) x 64mm (D 2.5”) x 12.3mm (H 0.5”) 108 g (3.8 oz.
Materials and Recycling Materials of the computer are as follows: Cabinet: Aluminum alloy ADC-12 or A380, Magnesium alloy AZ91D, UL grade PC+ABS GE C6200 or TN-3813BW Bracket: Aluminum 5052 Steel with Nickel plating Stainless Steel S304 Cushion pad: Nature rubber PCB: FR-4, UL 94V0 Battery: Rechargeable Lithium Ion Packing: Carton: Unbleached paper User's Guide: Recycled/Recyclable paper Please recycle the parts according to local regulations.
Environmental Ratings Temperature: Humidity: Altitude: DA05I: 0ºC ~ 45ºC (32ºF ~ 113ºF) operating -20ºC ~ 60ºC (-4ºF ~ 140ºF) storage DA05M: -20ºC ~ 50ºC (-4ºF ~ 140ºF) operating -40ºC ~ 70ºC (-40ºF ~ 158ºF) storage 5 ~ 95% Non-condensing operating 95% maximum storage 0 ~ 12,180 meters (0 ~ 40,000 feet) operating and storage 68
MAINTENANCE / SERVICE Cleaning Always turn OFF the power, unplug the power cord and remove the battery before cleaning. The exterior of the system and display may be wiped with a clean, soft, and lint-free cloth. If there is difficulty removing dirt, apply non-ammonia, non-alcohol based glass cleaner to the cloth and wipe. An air gun is recommended for cleaning water and dust. For salty water please wipe with fresh water then blow-dry with an air gun. Close all caps tightly before water cleaning.
• Remove the software suspected. RMA Service If troubleshooting is unsuccessful, please consult your dealer for service If it is necessary to send in the computer for repairs, please follow the dealer’s instructions for RMA# procedure. Shipping instructions: 1. Use the original shipping container and packing materials, if possible. 2. If the original packing materials are not available, wrap the equipment with soft material (e.g.
• • 4. 5. A DETAILED description of the problems you have encountered A list of the hardware/software configuration, if applicable. Clearly mark the outside of the shipping box with the RMA number. This will facilitate faster processing and avoid faulty return. Unless prior arrangements have been made, the customer is responsible for all shipping costs. Unauthorized use of the company’s shipping accounts is not permitted.
