Instruction manual

EU heat pumps
14
4.4 Setting the CLOCK
• Start setting the clock by pressing the “CLOCK” key. The LED screen will display the time and the hours
will start to blink.
• Press “or” to set the desired hour.
• Press “CLOCK” again. Now, the minutes start blinking.
• Press “or” again to set the minutes.
• Press “CLOCK” again to save the settings.
While setting the clock, the “TIMER ON” and “TIMER OFF” keys are inactive.
4.5 Use of timers
Timers allow you to set a time window in which the heat pump will be active. If you want the heat pump to
work only during the day, you can for instance set the “TIMER ON” key to 08:00 and the “TIMER OFF” key to
20:00. Setting the time can only be achieved when the pump is turned ON. When it is in STAND-BY mode,
timers are automatically deactivated.
4.5.1 Setting TIMER ON
The “TIMER ON” key activates the time at which the heat pump is automatically turned on.
• Start setup by pressing the “TIMER ON” key. This displays the previously set time on the LED screen and
makes it blink.
• Press “TIMER ON” again. Now, only the hours start blinking.
• Press “or” to set the desired hour.
• Press “TIMER ON” again. Now, the minutes start blinking.
• Press “or” again to set the minutes.
• Press “TIMER ON” again to save the setting and to activate start time.
Deactivation of “TIMER ON” when the heat pump is turned ON is achieved as follows:
• Press “TIMER ON”. The set time appears and starts blinking.
• Now, press “CLOCK” to deactivate the timer.
4.5.2 Setting TIMER OFF
The “TIMER OFF” key activates the time at which the heat pump will automatically stop.
• Start setup by pressing the “TIMER OFF” key. This displays the previously set time on the LED screen and
makes it blink.
• Press “TIMER OFF” again. Now, only the hours start blinking.
• Press “or” to set the desired hour.
• Press “TIMER OFF” again. Now, the minutes start blinking.
• Press “or” again to set the minutes.
• Press “TIMER OFF” again to save the setting and to activate stop time.
Deactivation of “TIMER OFF” when the heat pump is turned ON is achieved as follows:
• Press “TIMER OFF”. The set time appears and starts blinking.
• Now, press “CLOCK” to deactivate the timer.