PolyPro® Polypropylene venting products for high-efficiency condensing appliance installations. Listed to ULC-S636.
Specifications Applications PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas-burning appliances, including highefficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c. Materials and Construction Rigid pipe constructed of 2.2mm (minimum) thick polypropylene.
Commercial & OEM Product Development DuraVent engineers are expertly skilled to develop venting components to OEM specs. To satisfy specific venting requirements, DuraVent has the experience to provide custom design, prototyping and testing of vent systems and components engineered to the demands of specific appliances. The PolyPro Commercial Difference • Available in 5in. (130mm), 6in. (150mm) and 8in. (200mm) diameters. • Completely smooth inner wall for optimal flow performance.
Skyline Termination Locking Clamp Adjustable Flashing Horizontal Termination Kit Locking Clamp Elbow Skyline Termination Co-Linear Adapter Locking Clamp Pipe Length UV Resistant Elbow Locking Clamp Wall Strap Appliance Adapter Adapter Connector Elbow Pipe Length Wall Strap UV Resistant Wall Plate Single-Wall Pipe Appliance Adapter Adapter Connector 45° Elbow Locking Clamp (both set of pipes) Appliance Adapter Adapter Connector Horizontal Twin Pipe Elbow Termination Twin Pipe with Concentr
Single-Wall Venting System | PolyPro Single-Wall Pipe Use to vent condensing appliances. 2” (60mm) of overlap at the joint. Listed to ULC S636. Locking Clamps are required at all joint connections. Includes 1 Locking Clamp per each length .
PolyPro | Single-Wall Venting System Adjustable Pipe Use to add length to straight length of PolyPro pipe. Slips over any standard single-wall pipe length to form a telescoping pipe section. 4 ½” (114mm) of adjustment. Adjustable pipe not available in 8” (200mm) diameter. Includes 1 Locking Clamp.
Single-Wall Venting System | PolyPro 90° Elbow B Offsets around obstructions as needed. Includes 1 Locking Clamp.
PolyPro | Single-Wall Venting System Tee Cap Use cap on Tees, Condensate Drain or on other components where a cap is needed. SIZE ORDER # STOCK # SIZE ORDER # STOCK # 2” | 60mm 2PPS-C 3PPS-C 4PPS-C 810004103 810004142 810004185 5” | 130mm 5PPS-C 6PPS-C 8PPS-C 810004226 810006177 810004292 3” | 80mm 4” | 100mm Tee Cap w/ Condensate Drain Tee w/ Cap 6” | 150mm 8” | 200mm Use cap on Tees, Condensate Drain or on other components where a cap is needed.
Single-Wall Venting System | PolyPro Black Wall Plate Use to trim wall penetration. Painted black metal with gasket. 8 ½” 8 ½” ORDER # STOCK # SIZE ORDER # STOCK # 2PPS-WPB 3PPS-WPB 810004112 810004152 4” | 100mm 4PPS-WPB 810004195 3” | 80mm Black Wall Plate for Twin Pipes B A SIZE 2” | 60mm C Use to trim wall penetration when using two pipes. Painted black metal with gaskets.
PolyPro | Single-Wall Venting System 6" Fulton EDR 750-1500 to 6" PolyPro Appliance Adapter Use to connect 6” diameter PolyPro vent system to the Fulton EDR 750-1600 model appliance. No adapter connector and/or locking Clamp required. Hose clamps on both ends. A DIA ORDER # STOCK # DESCRIPTION 6" Fulton EDR 750-1500 6PPS-FULTEDR-6PPF 810010023 6" PP Appliance Adapter 5.9" 8" 8PPS-FULTEDR-8PPF 810010025 8" Fulton EDR 750-1500 8" PP Appliance Adapter 5.
Single-Wall Venting System | PolyPro Female Appliance Adapter Use to connect PolyPro to a nominal sized pipe with a smooth male end outlet. No adapter connector and/or Locking Clamp required. Hose clamps on both ends.
PolyPro | Single-Wall Venting System PolyPro-To-FasNSeal Adapter Use to transition from PolyPro vent system to FasNSeal vent system or to connect a metric appliance to FasNSeal. Can be used as an appliance adapter or inline. Includes 1 Locking Clamp.
Single-Wall Venting System | PolyPro Locking Band Clamp Use for connecting cut sections of pipe together. Also convenient for connection pipe sections used in extended vertical installations. A PPS-FSS A B 3 4 7 4 4 7 5B 8.19 9.92 SIZE ORDER # STOCK # A B 2” | 60mm 2PPS-LBC 3PPS-LBC 8 4PPS-LBC 10.55 5PPS-LBC 12.
PolyPro | Single-Wall Venting System Steep Roof Flashing Use to weather proof penetration of vent through the roof. For concentric pipe. Made of polypropylene. Adjusts from 5/12 to 12/12. Black or terra-cotta. UV resistant.
Single-Wall Venting System | PolyPro Lochinvar Horizontal Termination Kit Use to adapt PolyPro to the Ipex 636 low profile termination. Kit includes 14” pipe welded to an adapter and metal backing plate. Check with appliance manufacturer for approval. (Outer IPEX termination cap not included. Supplied by others.
PolyPro | Single-Wall Venting System Horizontal Termination Kit - Concentric Use for concentric horizontal terminations. Includes 2 appliance adapters, white wall plate, white firestop, and co-linear adapter. White Termination with Bird Guard Screen. UV resistant. Inner plate is 8 5/8” (220mm) square, outer plate is 9 7/16” (240mm) square for all flue sizes. Includes 2 Locking Clamps and two Adapter Connector clamps. Adapters included to transition from PVC appliance outlet to twin pipe PolyPro.
Commercial Venting Components | PolyPro PolyPro Commercial Venting Components Exhaust termination for vertical through-the-roof applications. PPS-VTM 5 6 8 PolyPro pipe is protectedAby a sturdy outer metal pipe and 745MM 741MM 800MM integrated cap. Painted with a durable, powder coated black B 1575MM 1575MM 1600MM finish. Includes support hardware.
PolyPro | Concentric Venting Components Storm Collar Clamps to black metal pipe covering support clamp and creating a weather tight seal above the flashing. For use with VTM. SIZE ORDER # STOCK # 5” | 130mm FSCPP5 FSCPP6 FSCPP8 810007172 810007173 810007174 6” | 150mm 8” | 200mm Horizontal Termination for Commercial Systems Use for through-the-wall horizontal terminations.
Concentric Venting Components | PolyPro Concentric Support Elbow Use the support elbow to stabilize a vertical termination.
PolyPro | Concentric Venting Components Extension with SP Use for combustion analysis testing without drilling holes into the vent system. Port cap is threaded for easy removal. Install immediately above the appliance.
Concentric Venting Components | PolyPro Use for concentric vertical terminations.
PolyPro | Concentric Venting Components EPDM Replacement Gasket PPS-FSS A B 3 4 7 Use as a replacement gasket for rigid PolyPro products. Available in packs of 12 for sizes 2" - 4". 4 4 7 5 8.19 9.92 Firestop Spacer SIZE ORDER # STOCK # 2” x 4” | 60mm x 100mm 2PPS-GA 3PPS-GA 4PPS-GA 810004124 810004164 810004204 3”6x 5” | 80mm x 130mm 8 4”7.87 x 6” | 100mm x 10.55 150mm 9.84 12.68 Use when penetrating floor levels. Two piece design for easier installation.
Double-Wall Venting System | PolyPro PolyPro Double-Wall Components Pipe Galvanized outer jacket can be used as a conduit for single-wall PolyPro pipe. In exterior applications, provides protection from impact and UV light. Also provides some insulation value for use in colder climates. Can be field-painted if desired. Simple twistlock assembly. To calculate installed length, subtract 1 1/2" for each joint. Includes internal metal support ring. PolyPro pipe sold separately.
PolyPro | Double-Wall Venting System 45° Elbow C Galvanized outer jacket 45 degree elbow. Includes metal support ring. To calculate installed length, subtract 1 1/2" for each joint. 45° SIZE ORDER # STOCK # 8” | 200mm 8PPS-E45DW 810009360 A B C 10" | 254mm 4 1/2" | 115mm 4 3/8" | 110mm B A Wall Strap Use in interior or exterior installations to add lateral support to PolyPro DW Pipe. Adjusts to provide a 1"-3" clearance to combustibles and maintain proper slope.
Double-Wall Venting System | PolyPro Adjustable Roof Flashing Use to weather-proof the penetration of the galvanized outer jacket through the roof. Made of galvalume. A SIZE B C 8” | 200mm SIZE 8” | 200mm Storm Collar Firestop Spacer B C Firestop Support øA PITCH 8PPS-FDW 810009925 0/12 -6/12 FLASHING STEEP ROOF ORDER # STOCK # PITCH 8PPS-FSRDW 810009934 7/12 - 12/12 SIZE ORDER # STOCK # A 8” | 200mm 8PPS-SCDW 810009943 10" | 254mm Use when penetrating walls or floor levels.
PolyPro | Double-Wall Venting System Roof Support Used to support galvanized outer jacket and PolyPro vent within at the roof level. Adjustable to different roof pitches. Ideal for cathedral ceilings. øA 6" Horizontal Trim Plate B øA B Vertical Termination B øA 346 DuraVent | www.duravent.
Flex Venting System | PolyPro PolyPro Flex Venting Components Need An Air Intake Solution? Create Your Own Kit Order DuraFlex AL length, Hanger Bracket, Coupler and Wall Plate for Twin Pipe. (2" Air intake will require a 2"-3" Increaser: 2PPS-X3) • (1) DuraFlex AL Length: DFA-25, DFA-35, or DFA-50 • (1) Hanger Bracket: DFA-FCB • (1) Coupler DFA-FCP • (1) Wall Plate for Twin Pipe: PPS-WPT Flex Chimney Lining Kit Use for a vertical flex lining system.
PolyPro | Flex Venting System B-vent Retrofit Adapters Use to retrofit common sizes of B-vent chimney for use as a chase for one appliance using PolyPro flex. Includes top cap adapter and bottom support cup. 3" size also includes required C-support plate.
Flex Venting System | PolyPro Flex Support Bracket Use to support PolyPro Flex from top of masonry chimney or chase. ø 15 ¾” SIZE ORDER # STOCK # SIZE ORDER # STOCK # 2” | 60mm 2PPS-FSB 3PPS-FSB 810004335 810004349 4” | 100mm 4PPS-FSB 5PPS-FSB 810004361 810004373 3” | 80mm Spacer Flex Length Use to center PolyPro flex. Universal for all diameters. Simple installation and ratchet adjustment. For 3” & 4” diameters, use 3PPS-S.
PolyPro | Flex Venting System Flex Male Adapter Use to connect PolyPro rigid pipe to PolyPro flex at the base of the system. Flex gasket included. SIZE ORDER # STOCK # SIZE ORDER # STOCK # 2” | 60mm 2PPS-FAM 3PPS-FAM 810004329 810004344 4” | 100mm 4PPS-FAM 5PPS-FAM 810004358 810004370 3” | 80mm Flex Female Adapter 5” | 130mm Use to convert from PolyPro flex back to PolyPro rigid pipe towards the top of the vent system. Flex gasket included.
Multi-Flex Venting System | PolyPro Flex Puller Use with the provided rope to guide PolyPro flex lengths down masonry chimney. 2” version snaps onto flex, 3”-5” version twist-locks onto the male flex adapter.