Submittal

Figure 11

POSITIONED

HORIZONTALLY

POSITIONED

VERTICALLY

AIR INLET PIPE

OUTER COVER PLATE

APPLY BEAD OF SILICON SEALANT

AROUND FEMALE END OF PIPE TO

SEAL AGAINST EXTERIOR WALL PLATE

INTERIOR

WALL PLATE

EXTERIOR WALL PLATE

EXHAUST TIP

EXHAUST PIPE

Figure 10

REMOVE GASKET

INSERT BIRD GUARD

Figure 9

ALIGN TABS WITH

MOUNTS

GASKET

EXTERIOR

WALL PLATE

INTERIOR

WALL PLATE

TERMINATIONS:

Horizontal Single Pipe (Fig.9)

1. Locate penetration in wall.

2. Cut or cut and frame hole. (Table 3)

3. Attach Inner Plate to wall.

4. Attach / seal Outer Plate to outside wall.

5. Line up keyway, slide black pipe (UV Protected) or

termination through plates.

6. If termination is used, attach with screws. Align tabs

with pipe mounts.

7. Add additional components to raise vent level if desired

(vent to be 12” above grade or average snow level).

8. Remove gasket and install Bird Guard into end of pipe.

(Fig.10)

9. Install Poly Pro venting system to/from termination to

appliance.