Install Instructions

10
Horizontal Twin Pipe (Fig.11)
1. Locate penetration.
2. Cut and frame hole. (Table 3)
3. Attach Interior Wall Plate to interior wall.
4. Attach and seal Exterior Wall Plate to
exterior wall.
5. Slide pipes through outer plate.
6. Rotate pipes to slide pipe past keyway.
7. Slide Exhaust Tip into exhaust pipe.
8. Mount Outer Cover Plate to exterior wall
plate.
9. Install Poly Pro venting system from
appliance to termination.
Lochinvar / IPEX twin plate termination
connector- 2" installation (Fig.12)
1. Slide PolyPro pipe w/ PVC adapter into
oblong hole and down. Brackets will
point away from the wall on the exterior
of the house and rest between the two
outward beads.
2. Install the termination assembly
in accordance with appliance
manufacturer’s instructions.
3. Verify exhaust pipe cannot be removed
from termination cap.
Lochinvar / IPEX twin plate termination
connector- 3" & 4" installation (Fig.13)
1. Slide PolyPro Pipe w/ PVC adapter into
small hole of retaining plate until it stops
on the adapter collar.
Figure 11
POSITIONED
HORIZONTALLY
POSITIONED
VERTICALLY
AIR INLET PIPE
OUTER COVER PLATE
APPLY BEAD OF SILICON SEALANT
AROUND FEMALE END OF PIPE TO
SEAL AGAINST EXTERIOR WALL PLATE
INTERIOR
WALL PLATE
EXTERIOR WALL PLATE
EXHAUST TIP
EXHAUST PIPE
Figure 12
BRACKET
POLYPRO PIPE
W/PVC ADAPTER
SUPPLIED WITH
TERMINATION KIT
2. Finish installing the termination
assembly in accordance with appliance
manufacturer’s instructions. PolyPro pipe
is to be installed on the exhaust outlet.
3. Once securely installed to exterior, verify
exhaust pipe cannot be removed from
termination cap.
Figure 13
POLYPRO PIPE
W/PVC ADAPTER
SUPPLIED WITH
TERMINATION KIT