PelletVent Pro Product Catalog
Typical Installations
Installation Key
1
Vertical Cap
10
Horizontal Cap
2
Storm Collar
11
Wall Thimble
3
Flashing
12
Ceiling Support Firestop Spacer
4
Cathedral Ceiling Support Box
13
Tee w/ Clean-Out Tee Cap
5
Straight Length Pipe
14
Wall Strap
6
45° Elbow
15
Attic Insulation Shield
7
Appliance Adapter
16
Prairie Termination Cap
8
Flex Length
17
CAS Adjustable Wall Channel
9
90° Elbow
16
• Refer to our Typical Venting Installation drawings to select the appropriate component
parts for your installation.
• The inner pipe diameter should match the outlet size of the appliance. For installations
that require 4” vent and the appliance has a 3” outlet, use an Increaser Adapter 3”-4”.
• Check the appliance manufacturer's installation instructions to conrm which types
of vent congurations are permitted (i.e. horizontal, vertical, chimney reline, etc.).
Also, check for any venting restrictions such as maximum horizontal run, minimum and
maximum vertical rise, maximum oset, etc.
• Be re safe! Maintain the minimum clearances (air-space) between the vent pipe
and nearby combustibles, as specied in the appliance manufacturer's installation
instructions. Use proper support and bracing. Follow local building codes and have your
venting system inspected.
Straight Length Pipe
Tee with Clean-Out Tee Cap
Wall Thimble
Appliance Adapter
Wall Strap
90° Elbow
Round Horizontal Cap
77
44
11
55
1313
22
33
Cathedral Ceiling
Stove Installation
Pellet Insert
16
8
8
Masonry Chimney
Relining
1
2
9
3
13
13
5
7
Attic Oset
1
3
6
7
5
2
15
12
13
Through-The-Wall
55
1010
1111
77
Through-The-Wall
Vertical Rise
9
13
11
10
7
5
PelletVent Pro | Biofuel Chimney
DuraVent | www.duravent.com
109