Single-wall interior stovepipe for connecting wood stoves to manufactued chimney Complete Venting Solutions DuraBlack Installation Instructions
A MAJOR CAUSE OF VENT RELATED FIRES IS FAILURE TO MAINTAIN REQUIRED CLEARANCES (AIR SPACES) TO COMBUSTIBLE MATERIALS. IT IS OF THE UTMOST IMPORTANCE THAT DURABLACK BE INSTALLED ONLY IN ACCORDANCE WITH THESE INSTRUCTIONS. NOTE: Read through all of these instructions before beginning your installation. Failure to install as described in this instruction will void the manufacturer’s warranty, and may have an effect on your homeowner’s insurance. Keep these instructions for future reference.
Step 3. Slide the first Pipe Section upwards over the Slip Connector. Rotate it so the seam is facing the wall. Push the Pipe Section upwards about 1 inch, so it will be held in place by the Slip Connector. The Slip Connector slides inside the pipe. SUPPORT BOX (NOT INCLUDED) LOCKING NOTCHES 14” SLIP CONNECTOR (ALLOWS UP TO 10” OF ADJUSTMENT) TRIM COLLAR (OPTIONAL) Step 4.
SIMPSON DURA-VENT LIMITED LIFETIME WARRANTY Simpson Dura-Vent Company, Inc. (“Simpson”) provides this limited lifetime warranty for all of its products to the original purchaser. Subject to the limitations set forth below, Simpson warrants that its products will be free from substantial defects in material or manufacturing, if properly installed, maintained and used.
