DuraTech Product Catalog

Adjustable Tee
Support Bracket
A
B
C
D
2”-6”
wall
Use as wall support for chimney system. Use of straps is optional.
Supports up to 50’ of DuraTech Chimney without straps, and 70’
of DuraTech Chimney with straps. Attaches to chimney pipe. Can
be installed above or below the Tee. If installed below the Tee, a
short section of pipe is required. Adjustable base provides 2” to
6” clearance to wall.
SIZE 5” 6” 7” 8”
A
7” 8” 9” 10”
B
10” 10” 12” 12”
C
11” 11” 13” 13”
D
11 ⁄” 11 ⁄” 13 ⁄” 13 ⁄”
GA
ORDER #
5DT-TSB 6DT-TSB 7DT-TSB 8DT-TSB
STOCK #
810000033 810000111 810000184 810000252
SS
ORDER #
5DT-TSBSS 6DT-TSBSS 7DT-TSBSS 8DT-TSBSS
STOCK #
810000034 810000112 810000185 810000253
Adjustable Wall Strap *new product*
A
1” 1”
2”
12”
63⁄4”
ITEM
NO.
QTY.
PART NUMBER Description
Material
Thickness
Material
1 1
C9968-01 Pipe Strap 0.023 GA - G90
2 1
C9968-02
7" Extension, Adj. Roof
Support Strap
0.023 GA - G90
3 1
C9968-03 8" Strap Extension 0.023 GA - G90
4 2
C9968-04 Adjustable Wall Strap Leg 0.06 GA - G90
5 2
CSEBOLT 0.2500-
20x0.75x0.75-C
6 4
NUT 21042 -28-N
7 2
PHSL-RH MS
0.25-20x2x2-N
A
1 / 1
1:8
SHEET NR.
SCALE
SHEETSIZE
CHECKED
REMARK
DESCRIPTION
PRODUCT LINE
DATE
DRAW.NR.
RSpiller
11/15/2011
TOOL.NUM.
ART.NR.
PROJECT FOLDER
C:\CAD\Projects\M&G DuraVent\C9000\
EAdair
ALL RIGHTS RESULTING FROM THIS DESIGN,
ARE RESERVED TO THE M&G GROUP
Units are inches
Tolerances
Assemblies:
x.xxx +/- 0.125"
Parts:
x.x +/- 0.06"
x.xx +/- 0.03"
x.xxx +/- 0.010"
Angles: +/- 3°
MATERIAL
See Parts List
DuraPlus HTC
DRAWN
DuraVent Inc.
Member of M&G GROUP
6"-8" Adjustabel Wall Strap
CONCEPT
REV.NR.
C9968
Stabilizes chimney while ensuring a minimum 2” clearance to
combustibles. Can adjust out to 6” clearance if needed. One part
covers 2 diameters (5” & 7” or 6” & 8”).
SIZE 5” & 7" 6" & 8"
A
7", 9" 8", 10"
GA
ORDER #
5DT-AWS 6DT-AWS
STOCK #
810007987 810007988
SS
ORDER #
5DT-AWS-SS 6DT-AWS-SS
STOCK #
810008010 810008012
Adjustable Re-Support Bracket
*new product*
13⁄”
2"
A
14⁄”
1"
1"
A
1 / 1
1:8
SHEET NR.
SCALE
SHEETSIZE
CHECKED
REMARK
DESCRIPTION
PRODUCT LINE
DATE
DRAW.NR.
C9979
RSpiller
01/24/2012
TOOL.NUM.
ART.NR.
PROJECT FOLDER
C:\CAD\Projects\M&G DuraVent\C9000\
ADiPalma
ALL RIGHTS RESULTING FROM THIS DESIGN,
ARE RESERVED TO THE M&G GROUP
Units are inches
Tolerances
Assemblies:
x.xxx +/- 0.125"
Parts:
x.x +/- 0.06"
x.xx +/- 0.03"
x.xxx +/- 0.010"
Angles: +/- 3°
MATERIAL
See Parts List
DuraPlus HTC
DRAWN
DuraVent Inc.
Member of M&G GROUP
6-8" Re-Support
CONCEPT
REV.NR.
Supports up to 20’ of DuraTech chimney. Can be installed
above or below the tee. Adjustable base slides easily to provide
between 2” and 6” of clearance to the wall. Can be used in place
of tee support for chimneys under 20’. Or as an addition to tee
support that goes beyond 50’.
SIZE 5” & 7" 6" & 8"
A
7", 9" 8", 10"
ORDER #
5DT-RES 6DT-RES
STOCK #
810007999 810008000
800-835-4429 | DuraVent
24
All-Fuel Chimney | DuraTech 5”- 8”