Installing European Copper Pot King or Bishop Model DuraChimney ii & DuraTech Installation Instructions Supplement
Read through these instructions before beginning your installation. Failure to install as described in these instructions will void the manufacturer’s warranty and may have an effect on your homeowner’s insurance and UL listing status. Keep these instructions for future reference. These installation instructions apply to installing the European Copper Chimney Pots King or Bishop model shroud/pot onto DuraTech (10”-16” diameter) or DuraChimney II (10”-14” diameter) chimney.
European Copper Pot With DuraChimney II Pipe (King Model shown) king adapter chase top flashing Dura Chimney II pipe Chimney pot mounting brackets Four Adapter clips hook into horizontal slots horizontal slots on inner wall of POT trim storm collar if needed to avoid base of pot Durachimney II pipe Figure 3 Figure 2 storm collar installed on Durachimney II only European Copper pot with DuraTech pipe (King Model shown) king adapter chase top flashing Four Adapter clips hook into horizontal slots
M&G DuraVent Warranty M&G DuraVent, Inc. (“DuraVent”) provides this limited lifetime warranty for all of its products to the original purchaser, with the exception of Ventinox (lifetime), DuraBlack (five years) and all Termination Caps (five years). Subject to the limitations set forth below, DuraVent warrants that its products will be free from substantial defects in material or manufacturing, if properly installed, maintained and used.