Important Please read this User’s Manual carefully to familiarize yourself with safe and effective usage. Please retain this manual for future reference.
SAFETY SYMBOLS This manual and this product use the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates an attention to be required. Indicates a prohibited action. Using the special functions, such as screen size change (ex.
PRECAUTIONS IMPORTANT • This product is intended to be used with an industrial device designed to build industrial systems. -- Transportation systems (Ship, aircraft, train, automobile, etc.) -- Safety devices (Disaster prevention system, security control system, etc.) -- Equipment with direct effect on human life (Life support systems, Medical equipment or devices used in the operating room, etc.
WARNING Use the enclose AC adapter. The enclosed AC adapter is for use with this product only. Do not use the AC adapter with other equipment. Connecting to power sources that do not match the power ratings of the AC adapter may result in fire or electric shock. Make sure the power cord meets the following requirements. This product does not include a power cord. Please provide separately a power cord which meets the requirements. (For more information, please contact your dealer.
CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury. Do not install the unit in a closed space. If the inerior becomes hot, it may result in fire, electric shock or damage. Do not touch the power plug or AC adapter with wet hands. Doing so may result in electrical shock. Use an easily accessible power outlet.
Notice for this monitor This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This product may not be covered by warranty for uses other than those described in this manual. Only use optional products manufactured or specified by us with this product.
Cleaning ATTENTION • Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the panel, and also quality deterioration of the image. • Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the panel. • Do not allow liquid to enter the clearance between the panel and the panel frame. NOTE • The optional ScreenCleaner is recommended for cleaning the panel surface.
CONTENTS Cover ............................................................. 1 PRECAUTIONS................................................. 3 Notice for this monitor............................................... 6 CONTENTS ............................................................. 8 Chapter 1 Introduction.......................................... 9 1-1. Features............................................................... 9 1-2. Package Contents.............................................
Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features • FDX1001T / FDV1001T: 10.4-inch screen, FDX1201T: 12.
1-2. Package Contents Please contact your local dealer for assistance if any of the listed items are missing or damaged. NOTE • Please retain the packing materials for future transport of the monitor. • • • • • • • • LCD Monitor AC Adapter Cable Tie Handle: 2 pcs. Handle mounting screw (M5 × 10 mm): 4 pcs. User’s Manual (Limited Warranty included) EIZO LCD Utility Disk (CD-ROM)*1 RS-232C Cable *1 The disk includes the touch panel driver.
Chapter 2 Assembly ● Exterior view FDX1001T / FDV1001T unit : mm (inch) 26(1.02) 22 (0.87) 430(16.9) 233(9.2) 46 (1.81) 26(1.02) 130(5.1) 76(2.99) 57.2±0.5 (2.25±0.02) 88.9±0.5 (3.5±0.02) 146.1±0.5(5.8±0.02) 37 (1.46) 220±1(8.7±0.04) 125(4.9) 160(6.3) 48 (1.89) 23 (0.91) 482±1(19.0±0.04) 465(18.3) 410(16.1) 213(8.4) 6×12 (0.24×0.47) (Rack mounting holes) Φ6.4 (0.
FDX1201T unit : mm (inch) 26(1.02) 22 (0.87) 430(16.9) 272(10.7) 47 (1.85) 26(1.02) 146(5.7) 88(3.46) 57.15±0.5 (2.25±0.02) 133.35±0.5(5.3±0.02) 190.5±0.5(7.5±0.02) 37.5 (1.48) 265±1(10.4±0.04) 186(7.3) 125(4.9) 70(2.76) 43.5 (1.71) 482±1(19.0±0.04) 465(18.3) 410(16.1) 247.4(9.7) 6×12 (0.24×0.47) (Rack mounting holes) Φ6.4 (0.
● How to assemble ATTENTION • This monitor can be attached to a 19-inch rack compliant with the EIA standards*1. Dimensions of rack mounting holes 15.875(0.63) 15.875(0.63) 12.7(0.5) 15.875(0.63) 15.875(0.63) 12.7(0.5) 31.75(1.25) 12.7(0.5) Wide pitch 31.75(1.25) 12.7(0.5) ... ... 450(17.7) 465.1(18.3) Universal pitch unit : mm (inch) *1 EIA standards: Standards concerning sizes of racks and devices to be stored in the racks specified by Electric Industries Association (EIA) 1.
Chapter 3 Settings and Adjustments 3-1. Buttons 1 1 button 2 button 3 4 button 2 3 5 Switches the input signal. Displays the Setting menu, fixes the setting or adjustment items on each menu, and saves the setting or adjustment results. • Used to select the setting or adjustment items, or to increase or decrease the adjustment values on each menu. button • When the settings menu is not displayed, pressing or switches between displaying and not displaying the crosshair. Turns the power on or off.
3-2. Basic Operation and Functions Basic operation of Setting menu 1 Displaying Setting Menu Press . 2 Setting/Adjusting 3 Exiting Choose [Exit] with or , and press . NOTE • Keeping pressed for 2 seconds will also exit the Setting menu.
Functions The settings adjustable in the Setting menu are as shown below. The availability of items depends on the input signal. √ : Configurable ― : Not configurable Tab Setting / adjustable item Color Setting / adjustable value PC Video √ √ Adjusts the brightness of the backlight. Setting / adjustable content Brightness 0 - 30 Contrast 0 - 30 √ √ Adjusts the contrast. Black Level 0 - 30 √ √ Adjusts the image brightness. Sharpness Off/Low/High ― √ Adjusts the image outlines.
Tab Setting / Setting / adjustable item adjustable value Others Video Aspect Normal/100% PC Video ― √ Setting / adjustable content Configures the display range of the input image (overscan). “Normal” : Displays the input image with the outmost parts slightly cut off. * This is how display devices normally display images. “100%” : Displays most of the input image.
Chapter 4 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. Common Problems Possible cause and remedy No picture • Power indicator does not light. • Check whether the power cord is connected correctly. • If the problem persists, turn off the power, and then turn it on again a few minutes later. • Power indicator lights orange. • Press • Power indicator lights blue. • Check whether the power of the connected device is turned on.
Touch panel problems Problems Possible cause and remedy Cursor position is not correct. / Cursor jumps. • Turn off and on the monitor. If the symptom is not improved, perform the calibration on the monitor. • Touch with one finger only. • Connect the monitor to the PC with the cable indicated in the User’s Manual of the monitor. Using a conversion adapter, the touch panel may not operate properly. Touch operation is not effective.
Chapter 5 Reference 5-1. Specifications FDX1001T LCD Panel Size 10.4-inch (260 mm) TFT color LCD Surface treatment Anti-glare Surface hardness 2H Viewing angle Horizontal 160°, Vertical 130° (CR : 10 or more) Dot Pitch 0.2055 mm Display Area (H × V) 210.4 mm × 157.8 mm Resolution 1024 dots × 768 lines Max. Display Color Approx. 16.7 million colors PC input Horizontal Scan Frequency 24-50 kHz Vertical Scan Frequency 55-75 Hz (Non-interlace) Max.
Environmental Temperature Conditions [Operating temperature] Main unit : 0 °C - 50 °C (32 °F - 122 °F) AC adapter : 0 °C - 40 °C (32 °F - 104 °F) [Storage temperature] -20 °C - 60 °C (-4 °F - 140 °F) Humidity [Operating humidity] Main unit : 20% - 90% R.H. (wet bulb temperature ≤ 39 °C (102 °F), no condensation) AC adapter : 20% - 85% R.H. (no condensation) [Storage humidity] 10% - 90% R.H.
Dimensions (Width) × (Height) × (Depth) 482 mm (19.0 inch) × 220 mm (8.7 inch) × 46 mm (1.81 inch) (excluding the projection) Mass Approx. 3.2 kg (7.1 lbs.) Environmental Temperature Conditions [Operating temperature] Main unit : 0 °C - 50 °C (32 °F - 122 °F) AC adapter : 0 °C - 40 °C (32 °F - 104 °F) [Storage temperature] -20 °C - 60 °C (-4 °F - 140 °F) Humidity [Operating humidity] Main unit : 20% - 90% R.H. (wet bulb temperature ≤ 39 °C (102 °F), no condensation) AC adapter : 20% - 85% R.H.
Power Consumption Screen Display On AC adapter (AC) : 20 W or less Main unit (DC) : 17 W or less Power Off AC adapter (AC) : 1.6 W or less Main unit (DC) : 0.8 W or less Dimensions (Width) × (Height) × (Depth) 482 mm (19.0 inch) × 265 mm (10.4 inch) × 47 mm (1.85 inch) (excluding the projection) Mass Approx. 3.9 kg (8.6 lbs.
5-2. Glossary Afterimage The Afterimage is particular to LCD monitors. When the monitor screen is left on for a long period without use. The Afterimage can be removed gradually by changing the displayed image. Clock The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog input signal is converted to a digital signal for image display. This is called clock adjustment.
5-3. Preset Timing The following table shows the factory preset video timing of the PC. ATTENTION • Display position may be deviated depending on the PC connected, which may require screen adjustment using Setting menu. • If a signal other than those listed in the table is input, adjust the screen using the Setting menu. However, screen display may still be incorrect even after the adjustment.
LIMITED WARRANTY EIZO NANAO CORPORATION (hereinafter referred to as “EIZO”) and distributors authorized by EIZO (hereinafter referred to as the “Distributors”) warrant, subject to and in accordance with the terms of this limited warranty (hereinafter referred to as the “Warranty”), to the original purchaser (hereinafter referred to as the “Original Purchaser”) who purchased the product specified in this document (hereinafter referred to as the “Product”) from EIZO or Distributors, that EIZO and Distributors
EIZO NANAO CORPORATION 153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan Phone: +81 76 277 6792 Fax: +81 76 277 6793 Helmut-Grashoff-Straße 18, 41179 Mönchengladbach, Germany Phone: +49 2161 8210210 Fax: +49 2161 8210150 中国苏州市苏州工业园区展业路8号中新科技工业坊5B Phone: +86 512 6252 0100 Fax: +86 512 6252 1508 http://www.eizo.com Copyright © 2010-2012 EIZO NANAO CORPORATION All rights reserved. 4th Edition-November, 2012 Printed in Japan. 00N0L625D1 (U.