Installation Sheet

2
© 06-2017
968.075.00.0 (00)
Product Data
Product Specifications
• For installi
ng 2-hole stud mounted wall-hung
washdown water closet fixtures with rear water
i
nlet and waste outlet
• For installation within or in front of drywall panels
• For installation in front of solid walls
• Fits within minimum 3 ½" (90 mm) framing wall
or plumbing chase
• Adjustable for fixture seat heights from 15" to
19" (381 to 483 mm)
• For flush actuator plates Sigma
Features
• Anti-siphon fill val
ve
• Impact resistant high density polyethylene
(HDPE) tank, insulated to prevent condensation
• 16-gauge, powder-coated, structural steel
tubing rated to 880 lbs. (400 kg) without damage
to finished wall or carrier unit
• Includes installation and rough-in materials
Warranty
Limited lifetime warranty on tank and carrier.
10 year warranty on fill valve and flush valve.
One year warranty on actuator plate.
Installation Dimensions
Material Determination
Recommended material for wall surface
construction:
• Gypsum / green board
• Cement board
• Tile backer board
• Ceramic tile surface
Minimum wall material thickness 3/8"
(10 mm)
0–7¾"
FF
3½"
5
1
/2
"
½" NPT
7½"
37⅜"–
41⅜"**
45¼"–
49¼"
26⅜"
19¾"
≥ 12"
11"–15"
1¾"–3½"
⅜"–
2"
3
1
/8
"
For 3½" max.
wall thickness
Vertical drainage only
For optional washlet
electrical outlet box
** assumes a typical seat
thickness of 1" and a distance
from fixture rim to
mounting rod centers of 3"
0–7¾"
FF
7"
typical
2"
3"
2"
For optional washlet water supply stop
7
1
/8
"/ 9"
0–7¾"
FF
≤ 24½"
15"–19"**
Seated
heigth
37⅜"–41⅜"**
Seated heigth+
22⅜"
For 5½" min.
wall thickness
For RH, LH and
vertical drainage
Geberit Model No. / Flush volume:
• 111.798.00.1 / 1.6/0.8 gpf (6.0/3.0 lpf)
• 111.597.00.1 / 1.28/0.8 gpf (4.8/3.0 lpf)